W9AUV Telemetry

This is the latest recevied telemetry packets stored in our database for station/object W9AUV. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Vin*	Rx1h*	Eff1h*	EffTl*
1765507959	13.58 Volt	80 Pkt	90 Pcnt	87 Pcnt
1765507957	13.58 Volt	80 Pkt	90 Pcnt	87 Pcnt
1765504280	13.73 Volt	80 Pkt	82 Pcnt	61 Pcnt
1765503680	13.73 Volt	80 Pkt	84 Pcnt	61 Pcnt
1765503080	13.73 Volt	80 Pkt	81 Pcnt	61 Pcnt
1765502480	13.73 Volt	80 Pkt	82 Pcnt	61 Pcnt
1765501880	13.73 Volt	80 Pkt	81 Pcnt	61 Pcnt
1765501280	13.73 Volt	80 Pkt	81 Pcnt	61 Pcnt
1765500680	13.73 Volt	80 Pkt	81 Pcnt	61 Pcnt
1765500080	13.73 Volt	80 Pkt	83 Pcnt	61 Pcnt
1765499480	13.8 Volt	100 Pkt	81 Pcnt	61 Pcnt
1765498880	13.73 Volt	90 Pkt	78 Pcnt	61 Pcnt
1765498280	13.73 Volt	100 Pkt	76 Pcnt	61 Pcnt
1765497680	13.73 Volt	100 Pkt	79 Pcnt	61 Pcnt
1765497080	13.58 Volt	110 Pkt	80 Pcnt	61 Pcnt
1765495880	13.58 Volt	150 Pkt	64 Pcnt	61 Pcnt
1765495280	13.58 Volt	160 Pkt	63 Pcnt	61 Pcnt
1765494698	13.73 Volt	170 Pkt	63 Pcnt	61 Pcnt
1765494080	13.73 Volt	180 Pkt	63 Pcnt	61 Pcnt
1765493480	13.73 Volt	180 Pkt	61 Pcnt	61 Pcnt
1765492884	13.73 Volt	160 Pkt	58 Pcnt	61 Pcnt
1765492281	13.73 Volt	140 Pkt	67 Pcnt	61 Pcnt
1765491681	13.73 Volt	140 Pkt	69 Pcnt	61 Pcnt
1765491081	13.73 Volt	130 Pkt	66 Pcnt	61 Pcnt
1765490480	13.73 Volt	120 Pkt	60 Pcnt	61 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

EffTl: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)