K8VAN-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object K8VAN-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1757502726	13.88 Volt	170 Pkt	30 Pkt	34 Pcnt
1757502125	13.88 Volt	210 Pkt	40 Pkt	40 Pcnt
1757500926	13.88 Volt	250 Pkt	60 Pkt	41 Pcnt
1757500334	13.88 Volt	270 Pkt	60 Pkt	44 Pcnt
1757499726	13.88 Volt	300 Pkt	60 Pkt	46 Pcnt
1757499130	13.88 Volt	300 Pkt	60 Pkt	46 Pcnt
1757498528	13.58 Volt	280 Pkt	50 Pkt	44 Pcnt
1757497926	13.88 Volt	270 Pkt	40 Pkt	44 Pcnt
1757497326	13.88 Volt	270 Pkt	40 Pkt	44 Pcnt
1757496127	13.88 Volt	260 Pkt	50 Pkt	43 Pcnt
1757495526	13.88 Volt	250 Pkt	50 Pkt	43 Pcnt
1757493727	13.88 Volt	240 Pkt	50 Pkt	43 Pcnt
1757492529	13.88 Volt	230 Pkt	40 Pkt	42 Pcnt
1757491925	13.88 Volt	220 Pkt	40 Pkt	41 Pcnt
1757490126	13.88 Volt	260 Pkt	50 Pkt	42 Pcnt
1757488926	13.88 Volt	240 Pkt	60 Pkt	39 Pcnt
1757488328	13.88 Volt	240 Pkt	60 Pkt	39 Pcnt
1757487726	13.88 Volt	240 Pkt	60 Pkt	39 Pcnt
1757487126	13.88 Volt	210 Pkt	60 Pkt	36 Pcnt
1757486526	13.88 Volt	200 Pkt	50 Pkt	36 Pcnt
1757485331	13.88 Volt	210 Pkt	40 Pkt	38 Pcnt
1757484727	13.88 Volt	200 Pkt	40 Pkt	37 Pcnt
1757483526	13.88 Volt	210 Pkt	30 Pkt	37 Pcnt
1757482926	13.88 Volt	210 Pkt	30 Pkt	39 Pcnt
1757482326	13.88 Volt	220 Pkt	30 Pkt	40 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

I1: 0, 19.5, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)