OE1KFR-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OE1KFR-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	Hum*	eCO2*	Temp.out*
1761504287	975.6 hPa	21.5 C deg	67 %	400 ppm	19.9 C deg
1761500656	975.6 hPa	21.5 C deg	67 %	400 ppm	20.1 C deg
1761498841	975.6 hPa	21.5 C deg	67 %	400 ppm	20.1 C deg
1761495211	975.6 hPa	21.5 C deg	67 %	400 ppm	19.8 C deg
1761493404	975.6 hPa	21.5 C deg	67 %	400 ppm	19.8 C deg
1761477063	975.6 hPa	21.5 C deg	67 %	400 ppm	19.8 C deg
1761471617	975.6 hPa	21.5 C deg	67 %	400 ppm	19.9 C deg
1761467985	975.6 hPa	21.5 C deg	67 %	400 ppm	20 C deg
1761464377	975.6 hPa	21.5 C deg	67 %	400 ppm	20.2 C deg
1761460729	975.6 hPa	21.5 C deg	67 %	400 ppm	19.7 C deg
1761455284	975.6 hPa	21.5 C deg	67 %	400 ppm	20 C deg
1761453472	975.6 hPa	21.5 C deg	67 %	400 ppm	20.1 C deg
1761449837	975.6 hPa	21.5 C deg	67 %	400 ppm	19.8 C deg
1761448021	975.6 hPa	21.5 C deg	67 %	400 ppm	20 C deg
1761446204	975.6 hPa	21.5 C deg	67 %	400 ppm	19.8 C deg
1761444398	975.6 hPa	21.5 C deg	67 %	400 ppm	19.9 C deg
1761435314	975.6 hPa	21.5 C deg	67 %	400 ppm	19.8 C deg
1761433499	975.6 hPa	21.5 C deg	67 %	400 ppm	20.1 C deg
1761431684	975.6 hPa	21.5 C deg	67 %	400 ppm	20 C deg
1761429872	975.6 hPa	21.5 C deg	67 %	400 ppm	20.1 C deg
1761426240	975.6 hPa	21.5 C deg	67 %	400 ppm	20.2 C deg
1761424433	975.6 hPa	21.5 C deg	67 %	400 ppm	20 C deg
1761420801	975.6 hPa	21.5 C deg	67 %	400 ppm	20.1 C deg
1761417165	975.6 hPa	21.5 C deg	67 %	400 ppm	20.4 C deg
1761395210	975.6 hPa	21.5 C deg	67 %	400 ppm	20.6 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

eCO2: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)