XE2J-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object XE2J-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Temp*
1772781850	14.03 Volt	30 Pkt	20 Pkt	100 Pcnt	27 C
1772780950	14.03 Volt	30 Pkt	20 Pkt	100 Pcnt	27 C
1772780050	14.03 Volt	30 Pkt	20 Pkt	100 Pcnt	26.5 C
1772779150	14.03 Volt	30 Pkt	20 Pkt	100 Pcnt	27 C
1772778250	14.03 Volt	30 Pkt	20 Pkt	100 Pcnt	27 C
1772777350	14.03 Volt	30 Pkt	20 Pkt	100 Pcnt	27 C
1772776450	14.03 Volt	30 Pkt	30 Pkt	100 Pcnt	27 C
1772775550	14.03 Volt	30 Pkt	30 Pkt	100 Pcnt	27 C
1772774650	14.03 Volt	30 Pkt	30 Pkt	100 Pcnt	27.5 C
1772773750	14.03 Volt	30 Pkt	30 Pkt	100 Pcnt	27.5 C
1772772850	14.03 Volt	30 Pkt	20 Pkt	100 Pcnt	27.5 C
1772771950	14.03 Volt	30 Pkt	20 Pkt	100 Pcnt	27.5 C
1772771050	14.03 Volt	30 Pkt	20 Pkt	97 Pcnt	27.5 C
1772770150	14.03 Volt	30 Pkt	20 Pkt	97 Pcnt	27.5 C
1772769250	14.03 Volt	30 Pkt	20 Pkt	94 Pcnt	27.5 C
1772768350	14.03 Volt	30 Pkt	30 Pkt	94 Pcnt	27.5 C
1772767450	14.03 Volt	30 Pkt	30 Pkt	97 Pcnt	27.5 C
1772766550	14.03 Volt	40 Pkt	30 Pkt	97 Pcnt	27.5 C
1772765650	14.03 Volt	40 Pkt	30 Pkt	100 Pcnt	27.5 C
1772764750	14.03 Volt	30 Pkt	20 Pkt	100 Pcnt	27.5 C
1772763851	14.03 Volt	30 Pkt	20 Pkt	100 Pcnt	27.5 C
1772762950	14.03 Volt	40 Pkt	30 Pkt	100 Pcnt	27.5 C
1772762051	14.03 Volt	40 Pkt	30 Pkt	97 Pcnt	27.5 C
1772761151	14.03 Volt	50 Pkt	40 Pkt	94 Pcnt	27.5 C
1772760251	14.03 Volt	60 Pkt	40 Pkt	95 Pcnt	27.5 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)