DB0HGW-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DB0HGW-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Efftt*
1765613819	13.83 Volt	30 Pkt	20 Pkt	73 Pcnt	63 Pcnt
1765610197	13.83 Volt	30 Pkt	20 Pkt	74 Pcnt	63 Pcnt
1765606593	13.83 Volt	20 Pkt	20 Pkt	50 Pcnt	63 Pcnt
1765602990	13.83 Volt	30 Pkt	30 Pkt	76 Pcnt	63 Pcnt
1765599386	13.83 Volt	30 Pkt	20 Pkt	68 Pcnt	63 Pcnt
1765595783	13.83 Volt	70 Pkt	20 Pkt	70 Pcnt	63 Pcnt
1765592179	13.83 Volt	80 Pkt	30 Pkt	78 Pcnt	63 Pcnt
1765588576	13.83 Volt	80 Pkt	30 Pkt	80 Pcnt	63 Pcnt
1765584990	13.83 Volt	80 Pkt	30 Pkt	75 Pcnt	63 Pcnt
1765581369	13.75 Volt	100 Pkt	30 Pkt	77 Pcnt	63 Pcnt
1765577766	13.83 Volt	110 Pkt	30 Pkt	90 Pcnt	63 Pcnt
1765574162	13.83 Volt	150 Pkt	20 Pkt	91 Pcnt	63 Pcnt
1765570559	13.83 Volt	130 Pkt	30 Pkt	89 Pcnt	63 Pcnt
1765566955	13.75 Volt	120 Pkt	30 Pkt	90 Pcnt	63 Pcnt
1765563352	13.83 Volt	170 Pkt	40 Pkt	95 Pcnt	63 Pcnt
1765559748	13.75 Volt	140 Pkt	80 Pkt	90 Pcnt	63 Pcnt
1765556145	13.83 Volt	90 Pkt	50 Pkt	87 Pcnt	63 Pcnt
1765552541	13.83 Volt	100 Pkt	60 Pkt	89 Pcnt	63 Pcnt
1765548938	13.83 Volt	150 Pkt	60 Pkt	86 Pcnt	63 Pcnt
1765541731	13.83 Volt	120 Pkt	30 Pkt	81 Pcnt	63 Pcnt
1765538128	13.83 Volt	120 Pkt	20 Pkt	71 Pcnt	63 Pcnt
1765534542	13.83 Volt	110 Pkt	20 Pkt	70 Pcnt	63 Pcnt
1765530921	13.83 Volt	110 Pkt	30 Pkt	80 Pcnt	63 Pcnt
1765527317	13.83 Volt	150 Pkt	50 Pkt	86 Pcnt	63 Pcnt
1765523714	13.75 Volt	140 Pkt	30 Pkt	87 Pcnt	63 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Efftt: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)