F1ZCK-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object F1ZCK-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1761521097	0.06 Rx Erlang	0.02 Tx Erlang	55 count/10m	0 count/10m	21 count/10m
1761519897	0.04 Rx Erlang	0.02 Tx Erlang	41 count/10m	0 count/10m	17 count/10m
1761518697	0.05 Rx Erlang	0.02 Tx Erlang	47 count/10m	0 count/10m	17 count/10m
1761517497	0.06 Rx Erlang	0.02 Tx Erlang	50 count/10m	0 count/10m	20 count/10m
1761516305	0.05 Rx Erlang	0.02 Tx Erlang	46 count/10m	0 count/10m	17 count/10m
1761515097	0.03 Rx Erlang	0.02 Tx Erlang	33 count/10m	0 count/10m	13 count/10m
1761513897	0.02 Rx Erlang	0.01 Tx Erlang	21 count/10m	0 count/10m	10 count/10m
1761512697	0.03 Rx Erlang	0.01 Tx Erlang	25 count/10m	0 count/10m	10 count/10m
1761511497	0.03 Rx Erlang	0.02 Tx Erlang	24 count/10m	0 count/10m	12 count/10m
1761510297	0.04 Rx Erlang	0.02 Tx Erlang	27 count/10m	0 count/10m	13 count/10m
1761509097	0.04 Rx Erlang	0.02 Tx Erlang	28 count/10m	0 count/10m	14 count/10m
1761507897	0.04 Rx Erlang	0.02 Tx Erlang	32 count/10m	0 count/10m	15 count/10m
1761506697	0.04 Rx Erlang	0.02 Tx Erlang	35 count/10m	0 count/10m	14 count/10m
1761505497	0.03 Rx Erlang	0.01 Tx Erlang	27 count/10m	0 count/10m	14 count/10m
1761504297	0.03 Rx Erlang	0.01 Tx Erlang	24 count/10m	0 count/10m	10 count/10m
1761503097	0.03 Rx Erlang	0.01 Tx Erlang	29 count/10m	0 count/10m	11 count/10m
1761500697	0.03 Rx Erlang	0.01 Tx Erlang	22 count/10m	0 count/10m	11 count/10m
1761499497	0.03 Rx Erlang	0.01 Tx Erlang	24 count/10m	0 count/10m	12 count/10m
1761498297	0.03 Rx Erlang	0.01 Tx Erlang	26 count/10m	0 count/10m	7 count/10m
1761497097	0.03 Rx Erlang	0.01 Tx Erlang	29 count/10m	0 count/10m	9 count/10m
1761495897	0.04 Rx Erlang	0.01 Tx Erlang	35 count/10m	0 count/10m	12 count/10m
1761494697	0.04 Rx Erlang	0.02 Tx Erlang	38 count/10m	0 count/10m	13 count/10m
1761493497	0.04 Rx Erlang	0.01 Tx Erlang	31 count/10m	0 count/10m	12 count/10m
1761492300	0.05 Rx Erlang	0.02 Tx Erlang	38 count/10m	0 count/10m	15 count/10m
1761491097	0.02 Rx Erlang	0.01 Tx Erlang	17 count/10m	0 count/10m	9 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)