BALD Telemetry

This is the latest recevied telemetry packets stored in our database for station/object BALD. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1784676553	11.77 Volt	370 Pkt	80 Pkt	85 Pcnt
1784676553	11.77 Volt	370 Pkt	80 Pkt	85 Pcnt
1784675953	11.77 Volt	360 Pkt	70 Pkt	85 Pcnt
1784675953	11.77 Volt	360 Pkt	70 Pkt	85 Pcnt
1784675353	11.77 Volt	350 Pkt	70 Pkt	85 Pcnt
1784675353	11.77 Volt	350 Pkt	70 Pkt	85 Pcnt
1784674753	11.77 Volt	340 Pkt	70 Pkt	85 Pcnt
1784674753	11.77 Volt	340 Pkt	70 Pkt	85 Pcnt
1784674153	11.77 Volt	330 Pkt	70 Pkt	84 Pcnt
1784674153	11.77 Volt	330 Pkt	70 Pkt	84 Pcnt
1784673553	11.77 Volt	320 Pkt	70 Pkt	83 Pcnt
1784673553	11.77 Volt	320 Pkt	70 Pkt	83 Pcnt
1784672953	11.77 Volt	330 Pkt	80 Pkt	84 Pcnt
1784672953	11.77 Volt	330 Pkt	80 Pkt	84 Pcnt
1784672353	11.77 Volt	330 Pkt	80 Pkt	85 Pcnt
1784672353	11.77 Volt	330 Pkt	80 Pkt	85 Pcnt
1784671753	11.77 Volt	340 Pkt	90 Pkt	85 Pcnt
1784671753	11.77 Volt	340 Pkt	90 Pkt	85 Pcnt
1784671153	11.77 Volt	360 Pkt	90 Pkt	84 Pcnt
1784671153	11.77 Volt	360 Pkt	90 Pkt	84 Pcnt
1784670553	11.77 Volt	380 Pkt	100 Pkt	85 Pcnt
1784670553	11.77 Volt	380 Pkt	100 Pkt	85 Pcnt
1784669953	11.77 Volt	410 Pkt	100 Pkt	87 Pcnt
1784669953	11.77 Volt	410 Pkt	100 Pkt	87 Pcnt
1784669353	11.77 Volt	430 Pkt	90 Pkt	87 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)