K1LEO-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object K1LEO-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1785318892	0.17 Rx Erlang	0.04 Tx Erlang	164 count/10m	1 count/10m	40 count/10m
1785317692	0.16 Rx Erlang	0.04 Tx Erlang	151 count/10m	8 count/10m	35 count/10m
1785316492	0.2 Rx Erlang	0.04 Tx Erlang	165 count/10m	6 count/10m	33 count/10m
1785315292	0.16 Rx Erlang	0.04 Tx Erlang	148 count/10m	10 count/10m	35 count/10m
1785314092	0.16 Rx Erlang	0.05 Tx Erlang	145 count/10m	11 count/10m	38 count/10m
1785312892	0.17 Rx Erlang	0.04 Tx Erlang	136 count/10m	4 count/10m	32 count/10m
1785311692	0.16 Rx Erlang	0.04 Tx Erlang	134 count/10m	4 count/10m	33 count/10m
1785310492	0.16 Rx Erlang	0.04 Tx Erlang	151 count/10m	1 count/10m	39 count/10m
1785309292	0.15 Rx Erlang	0.03 Tx Erlang	129 count/10m	0 count/10m	27 count/10m
1785308092	0.13 Rx Erlang	0.05 Tx Erlang	121 count/10m	0 count/10m	39 count/10m
1785306892	0.15 Rx Erlang	0.04 Tx Erlang	117 count/10m	1 count/10m	30 count/10m
1785305692	0.16 Rx Erlang	0.04 Tx Erlang	140 count/10m	2 count/10m	33 count/10m
1785304492	0.17 Rx Erlang	0.03 Tx Erlang	146 count/10m	8 count/10m	31 count/10m
1785303292	0.14 Rx Erlang	0.04 Tx Erlang	141 count/10m	1 count/10m	34 count/10m
1785302092	0.15 Rx Erlang	0.04 Tx Erlang	140 count/10m	3 count/10m	35 count/10m
1785300892	0.15 Rx Erlang	0.04 Tx Erlang	144 count/10m	3 count/10m	34 count/10m
1785299692	0.14 Rx Erlang	0.04 Tx Erlang	124 count/10m	1 count/10m	35 count/10m
1785298492	0.15 Rx Erlang	0.03 Tx Erlang	150 count/10m	1 count/10m	32 count/10m
1785297292	0.16 Rx Erlang	0.04 Tx Erlang	155 count/10m	4 count/10m	37 count/10m
1785296092	0.16 Rx Erlang	0.04 Tx Erlang	151 count/10m	0 count/10m	38 count/10m
1785294892	0.14 Rx Erlang	0.03 Tx Erlang	136 count/10m	3 count/10m	34 count/10m
1785293732	0.13 Rx Erlang	0.04 Tx Erlang	123 count/10m	2 count/10m	38 count/10m
1785292492	0.13 Rx Erlang	0.04 Tx Erlang	133 count/10m	1 count/10m	35 count/10m
1785291292	0.16 Rx Erlang	0.04 Tx Erlang	156 count/10m	9 count/10m	40 count/10m
1785290092	0.13 Rx Erlang	0.04 Tx Erlang	115 count/10m	0 count/10m	34 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)