Overview Statistics Trail Chart Weather Telemetry Raw packets
 

This is the latest recevied telemetry packets stored in our database for station/object HP3ICC-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>
Time RxTraffic* TxTraffic* RxDrop* RSSI* Voltage*
1776635000 10 Pkt 0 Pkt 0 Pkt -22 dBm 5.13 V
1776633175 6 Pkt 0 Pkt 0 Pkt -19 dBm 5.19 V
1776631350 14 Pkt 0 Pkt 0 Pkt -19 dBm 5.19 V
1776629524 14 Pkt 0 Pkt 0 Pkt -20 dBm 5.19 V
1776627698 21 Pkt 0 Pkt 0 Pkt -17 dBm 5.19 V
1776625872 13 Pkt 0 Pkt 0 Pkt -17 dBm 5.19 V
1776624047 13 Pkt 0 Pkt 0 Pkt -17 dBm 5.21 V
1776622222 12 Pkt 0 Pkt 0 Pkt -16 dBm 5.17 V
1776620396 9 Pkt 0 Pkt 0 Pkt -20 dBm 5.19 V
1776618570 20 Pkt 0 Pkt 0 Pkt -19 dBm 5.19 V
1776616745 16 Pkt 0 Pkt 0 Pkt -26 dBm 5.19 V
1776614919 25 Pkt 0 Pkt 0 Pkt -18 dBm 5.17 V
1776613093 40 Pkt 0 Pkt 0 Pkt -20 dBm 5.17 V
1776611266 28 Pkt 0 Pkt 0 Pkt -20 dBm 5.17 V
1776609440 33 Pkt 0 Pkt 0 Pkt -22 dBm 5.17 V
1776607614 30 Pkt 0 Pkt 0 Pkt -20 dBm 5.19 V
1776605788 0 Pkt 0 Pkt 0 Pkt -19 dBm 5.21 V
1776603963 2 Pkt 0 Pkt 0 Pkt -18 dBm 5.25 V
1776602138 1 Pkt 0 Pkt 0 Pkt -21 dBm 5.17 V
1776600313 0 Pkt 0 Pkt 0 Pkt -18 dBm 5.19 V
1776598488 0 Pkt 0 Pkt 0 Pkt -38 dBm 5.17 V
1776596663 0 Pkt 0 Pkt 0 Pkt -19 dBm 5.17 V
1776594837 0 Pkt 0 Pkt 0 Pkt -22 dBm 5.17 V
1776593012 0 Pkt 0 Pkt 0 Pkt -15 dBm 5.19 V
1776591187 0 Pkt 0 Pkt 0 Pkt -17 dBm 5.17 V
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
Voltage: 0, 1, 0

  • The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
  • Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
    The sent equation coefficients is used in the equation: a * value2 + b * value + c.
  • The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
  • The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
  • All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
  • A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)