EL-DM7HF Telemetry

This is the latest recevied telemetry packets stored in our database for station/object EL-DM7HF. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Value1*	Value2*	Value3*	Value4*
1784676409	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1784675810	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1784675210	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	1 TXcount/10m
1784674609	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1784674010	0 RX Erlang	0.02 TX Erlang	0 RXcount/10m	3 TXcount/10m
1784673409	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	1 TXcount/10m
1784672810	0 RX Erlang	0.44 TX Erlang	0 RXcount/10m	28 TXcount/10m
1784672210	0 RX Erlang	0.83 TX Erlang	0 RXcount/10m	26 TXcount/10m
1784671609	0 RX Erlang	0.74 TX Erlang	0 RXcount/10m	25 TXcount/10m
1784671010	0 RX Erlang	0.93 TX Erlang	0 RXcount/10m	13 TXcount/10m
1784670410	0 RX Erlang	0.96 TX Erlang	0 RXcount/10m	16 TXcount/10m
1784669810	0 RX Erlang	0.88 TX Erlang	0 RXcount/10m	45 TXcount/10m
1784669209	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1784668610	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	1 TXcount/10m
1784668009	0 RX Erlang	0.42 TX Erlang	0 RXcount/10m	23 TXcount/10m
1784667409	0 RX Erlang	0.66 TX Erlang	0 RXcount/10m	6 TXcount/10m
1784666810	0 RX Erlang	0.97 TX Erlang	0 RXcount/10m	8 TXcount/10m
1784666210	0 RX Erlang	0.98 TX Erlang	0 RXcount/10m	6 TXcount/10m
1784665610	0 RX Erlang	0.94 TX Erlang	0 RXcount/10m	17 TXcount/10m
1784665010	0 RX Erlang	0.06 TX Erlang	0 RXcount/10m	5 TXcount/10m
1784664410	0 RX Erlang	0.04 TX Erlang	0 RXcount/10m	5 TXcount/10m
1784663809	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	2 TXcount/10m
1784663210	0 RX Erlang	0.02 TX Erlang	0 RXcount/10m	4 TXcount/10m
1784662609	0 RX Erlang	0.05 TX Erlang	0 RXcount/10m	7 TXcount/10m
1784662009	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m

*Used Equation Coefficients:

Value1: 0, 1, 0

Value2: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)