DB0LPZ-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DB0LPZ-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1753637016	0 Rx Erlang	0 Tx Erlang	0 count/10m	0 count/10m	3 count/10m
1753635816	0.05 Rx Erlang	0 Tx Erlang	36 count/10m	2 count/10m	4 count/10m
1753634616	0.05 Rx Erlang	0 Tx Erlang	47 count/10m	4 count/10m	3 count/10m
1753633416	0.06 Rx Erlang	0 Tx Erlang	58 count/10m	4 count/10m	3 count/10m
1753631016	0.07 Rx Erlang	0 Tx Erlang	74 count/10m	7 count/10m	4 count/10m
1753629816	0.06 Rx Erlang	0 Tx Erlang	61 count/10m	4 count/10m	3 count/10m
1753628616	0.04 Rx Erlang	0 Tx Erlang	37 count/10m	0 count/10m	4 count/10m
1753627416	0.06 Rx Erlang	0 Tx Erlang	53 count/10m	3 count/10m	3 count/10m
1753626216	0.05 Rx Erlang	0 Tx Erlang	50 count/10m	3 count/10m	4 count/10m
1753625016	0.05 Rx Erlang	0 Tx Erlang	49 count/10m	8 count/10m	3 count/10m
1753623816	0.04 Rx Erlang	0 Tx Erlang	34 count/10m	3 count/10m	4 count/10m
1753622616	0.05 Rx Erlang	0 Tx Erlang	50 count/10m	7 count/10m	4 count/10m
1753621416	0.06 Rx Erlang	0 Tx Erlang	41 count/10m	4 count/10m	3 count/10m
1753619016	0.07 Rx Erlang	0 Tx Erlang	61 count/10m	8 count/10m	3 count/10m
1753617816	0.07 Rx Erlang	0 Tx Erlang	62 count/10m	4 count/10m	3 count/10m
1753615416	0.06 Rx Erlang	0 Tx Erlang	56 count/10m	9 count/10m	3 count/10m
1753614216	0.06 Rx Erlang	0 Tx Erlang	55 count/10m	0 count/10m	3 count/10m
1753613016	0.04 Rx Erlang	0 Tx Erlang	39 count/10m	0 count/10m	4 count/10m
1753611816	0.05 Rx Erlang	0 Tx Erlang	51 count/10m	3 count/10m	3 count/10m
1753610616	0.05 Rx Erlang	0 Tx Erlang	46 count/10m	5 count/10m	3 count/10m
1753609416	0.06 Rx Erlang	0.01 Tx Erlang	49 count/10m	6 count/10m	4 count/10m
1753608216	0.06 Rx Erlang	0 Tx Erlang	54 count/10m	8 count/10m	3 count/10m
1753607016	0.06 Rx Erlang	0 Tx Erlang	46 count/10m	4 count/10m	4 count/10m
1753605816	0.06 Rx Erlang	0 Tx Erlang	50 count/10m	8 count/10m	4 count/10m
1753604616	0.05 Rx Erlang	0 Tx Erlang	49 count/10m	6 count/10m	3 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)