IR2ZZN-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IR2ZZN-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Rx10*
1761538843	14.06 Volt	30 Pkt	20 Pkt	92 Pcnt	8 Pkt
1761538543	14.06 Volt	30 Pkt	10 Pkt	91 Pcnt	7 Pkt
1761538243	14.06 Volt	30 Pkt	20 Pkt	94 Pcnt	4 Pkt
1761537943	14.06 Volt	30 Pkt	10 Pkt	94 Pcnt	5 Pkt
1761537643	14.06 Volt	30 Pkt	20 Pkt	92 Pcnt	6 Pkt
1761537343	14.06 Volt	30 Pkt	10 Pkt	91 Pcnt	1 Pkt
1761537043	14.06 Volt	30 Pkt	20 Pkt	90 Pcnt	6 Pkt
1761536743	14.06 Volt	30 Pkt	10 Pkt	89 Pcnt	5 Pkt
1761536443	14.06 Volt	30 Pkt	20 Pkt	88 Pcnt	3 Pkt
1761536143	14.06 Volt	30 Pkt	10 Pkt	87 Pcnt	4 Pkt
1761535843	14.06 Volt	30 Pkt	20 Pkt	84 Pcnt	8 Pkt
1761535543	14.06 Volt	30 Pkt	10 Pkt	75 Pcnt	1 Pkt
1761535243	14.06 Volt	30 Pkt	10 Pkt	77 Pcnt	7 Pkt
1761534943	14.06 Volt	30 Pkt	10 Pkt	75 Pcnt	6 Pkt
1761534643	14.06 Volt	30 Pkt	10 Pkt	71 Pcnt	3 Pkt
1761534343	14.06 Volt	30 Pkt	10 Pkt	71 Pcnt	4 Pkt
1761534043	14.06 Volt	30 Pkt	10 Pkt	72 Pcnt	7 Pkt
1761533745	14.06 Volt	30 Pkt	10 Pkt	73 Pcnt	3 Pkt
1761533443	14.06 Volt	30 Pkt	10 Pkt	74 Pcnt	8 Pkt
1761533143	14.06 Volt	30 Pkt	10 Pkt	70 Pcnt	6 Pkt
1761532843	14.06 Volt	30 Pkt	10 Pkt	68 Pcnt	2 Pkt
1761532543	14.06 Volt	30 Pkt	10 Pkt	66 Pcnt	4 Pkt
1761532243	14.06 Volt	30 Pkt	20 Pkt	67 Pcnt	5 Pkt
1761531943	14.06 Volt	30 Pkt	10 Pkt	68 Pcnt	3 Pkt
1761531643	14.06 Volt	30 Pkt	20 Pkt	65 Pcnt	7 Pkt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Rx10: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)