TA0TC-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA0TC-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	RxTraffic*	RxDrop*	RSSI*	Voltage*
1784704619	26 Pkt	3 Pkt	31 dBm	15.46 V
1784703127	11 Pkt	2 Pkt	31 dBm	15.46 V
1784702382	11 Pkt	9 Pkt	-961 dBm	237.16 V
1784701638	14 Pkt	2 Pkt	31 dBm	15.42 V
1784700892	23 Pkt	2 Pkt	31 dBm	15.38 V
1784700145	14 Pkt	2 Pkt	31 dBm	15.89 V
1784699399	12 Pkt	1 Pkt	31 dBm	15.32 V
1784698654	15 Pkt	1 Pkt	31 dBm	15.28 V
1784697910	17 Pkt	4 Pkt	31 dBm	15.79 V
1784697161	14 Pkt	0 Pkt	31 dBm	16.06 V
1784696417	18 Pkt	0 Pkt	31 dBm	13.47 V
1784695672	13 Pkt	0 Pkt	31 dBm	15.38 V
1784694925	9 Pkt	3 Pkt	31 dBm	15.54 V
1784694180	18 Pkt	5 Pkt	31 dBm	15.75 V
1784693436	23 Pkt	3 Pkt	31 dBm	15.46 V
1784692688	18 Pkt	2 Pkt	31 dBm	15.36 V
1784691943	26 Pkt	3 Pkt	31 dBm	16.65 V
1784691196	22 Pkt	4 Pkt	31 dBm	15.5 V
1784689702	19 Pkt	4 Pkt	31 dBm	15.36 V
1784688955	34 Pkt	4 Pkt	31 dBm	15.44 V
1784688205	23 Pkt	1 Pkt	31 dBm	17.31 V
1784687459	14 Pkt	1 Pkt	31 dBm	15.44 V
1784686714	25 Pkt	3 Pkt	31 dBm	16.2 V
1784685219	22 Pkt	3 Pkt	31 dBm	15.4 V
1784684473	16 Pkt	1 Pkt	31 dBm	15.36 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)