N0DSS-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object N0DSS-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Temp*	Rx1h*	Eff1h*
1773300879	13.95 Volt	-64 C	270 Pkt	74 Pcnt
1773299080	13.95 Volt	-64 C	250 Pkt	71 Pcnt
1773297286	13.95 Volt	-64 C	230 Pkt	70 Pcnt
1773295480	13.95 Volt	-64 C	220 Pkt	68 Pcnt
1773293680	13.95 Volt	-64 C	220 Pkt	65 Pcnt
1773291880	13.95 Volt	-64 C	220 Pkt	64 Pcnt
1773290080	13.95 Volt	-64 C	240 Pkt	68 Pcnt
1773288280	13.88 Volt	-64 C	230 Pkt	69 Pcnt
1773286480	13.95 Volt	-64 C	220 Pkt	68 Pcnt
1773284680	13.95 Volt	-64 C	240 Pkt	68 Pcnt
1773282880	13.88 Volt	-64 C	280 Pkt	67 Pcnt
1773281081	13.88 Volt	-64 C	310 Pkt	67 Pcnt
1773279281	13.88 Volt	-64 C	280 Pkt	66 Pcnt
1773277481	13.88 Volt	-64 C	330 Pkt	72 Pcnt
1773275681	13.88 Volt	-64 C	360 Pkt	74 Pcnt
1773273881	13.88 Volt	-64 C	320 Pkt	65 Pcnt
1773272081	13.88 Volt	-64 C	310 Pkt	60 Pcnt
1773270281	13.88 Volt	-64 C	380 Pkt	67 Pcnt
1773268481	13.88 Volt	-64 C	470 Pkt	73 Pcnt
1773266682	13.95 Volt	-64 C	440 Pkt	74 Pcnt
1773264881	13.88 Volt	-64 C	360 Pkt	74 Pcnt
1773263082	13.88 Volt	-64 C	290 Pkt	71 Pcnt
1773261282	13.88 Volt	-64 C	270 Pkt	73 Pcnt
1773259482	13.95 Volt	-64 C	260 Pkt	70 Pcnt
1773257682	13.88 Volt	-64 C	260 Pkt	67 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Temp: 0, 0.75, -64

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)