GM7AFE Telemetry

This is the latest recevied telemetry packets stored in our database for station/object GM7AFE. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx1h*	Dg1h*	Eff1h*	A4*	A5*
1753243030	0 Pkt	0 Pkt	100 Pcnt	0 Volts	0 Volts
1753242730	0 Pkt	0 Pkt	100 Pcnt	0 Volts	0 Volts
1753242430	0 Pkt	0 Pkt	100 Pcnt	0 Volts	0 Volts
1753242129	0 Pkt	0 Pkt	100 Pcnt	0 Volts	0 Volts
1753241829	0 Pkt	0 Pkt	100 Pcnt	0 Volts	0 Volts
1753241529	0 Pkt	0 Pkt	100 Pcnt	0 Volts	0 Volts
1753241228	0 Pkt	0 Pkt	100 Pcnt	0 Volts	0 Volts
1753240928	0 Pkt	0 Pkt	100 Pcnt	0 Volts	0 Volts
1753240628	0 Pkt	0 Pkt	100 Pcnt	0 Volts	0 Volts
1753240327	0 Pkt	0 Pkt	100 Pcnt	0 Volts	0 Volts
1753240027	0 Pkt	0 Pkt	100 Pcnt	0 Volts	0 Volts
1753239727	0 Pkt	0 Pkt	100 Pcnt	0 Volts	0 Volts
1753239427	0 Pkt	0 Pkt	100 Pcnt	0 Volts	0 Volts
1753239126	0 Pkt	0 Pkt	100 Pcnt	0 Volts	0 Volts
1753238826	0 Pkt	0 Pkt	100 Pcnt	0 Volts	0 Volts
1753238526	0 Pkt	0 Pkt	100 Pcnt	0 Volts	0 Volts
1753238225	0 Pkt	0 Pkt	100 Pcnt	0 Volts	0 Volts
1753237925	0 Pkt	0 Pkt	100 Pcnt	0 Volts	0 Volts
1753237625	0 Pkt	0 Pkt	100 Pcnt	0 Volts	0 Volts
1753237324	0 Pkt	0 Pkt	100 Pcnt	0 Volts	0 Volts
1753237024	0 Pkt	0 Pkt	100 Pcnt	0 Volts	0 Volts
1753236724	0 Pkt	0 Pkt	100 Pcnt	0 Volts	0 Volts
1753236424	0 Pkt	0 Pkt	100 Pcnt	0 Volts	0 Volts
1753236123	0 Pkt	0 Pkt	100 Pcnt	0 Volts	0 Volts
1753235823	0 Pkt	0 Pkt	100 Pcnt	0 Volts	0 Volts

*Used Equation Coefficients:

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A4: 0, 0, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)