IK2EXH Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IK2EXH. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	Dg10m*	DgR*	Eff1h*
1784677163	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1784676863	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1784676563	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1784676263	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1784675963	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1784675663	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1784675364	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1784675064	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1784674763	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1784674463	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1784674163	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1784673863	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1784673563	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1784673263	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1784672963	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1784672663	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1784672363	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1784672063	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1784671764	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1784671464	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1784671163	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1784670863	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1784670563	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1784670263	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1784669963	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

DgR: 0, 0.001, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)