OH3RDE-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OH3RDE-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1753556750	0.04 Rx Erlang	0.02 Tx Erlang	40 count/10m	17 count/10m	18 count/10m
1753555567	0.04 Rx Erlang	0.03 Tx Erlang	38 count/10m	19 count/10m	19 count/10m
1753554350	0.04 Rx Erlang	0.02 Tx Erlang	32 count/10m	16 count/10m	19 count/10m
1753553150	0.04 Rx Erlang	0.02 Tx Erlang	34 count/10m	14 count/10m	19 count/10m
1753551950	0.05 Rx Erlang	0.02 Tx Erlang	40 count/10m	17 count/10m	19 count/10m
1753550750	0.03 Rx Erlang	0.02 Tx Erlang	25 count/10m	13 count/10m	19 count/10m
1753549568	0.04 Rx Erlang	0.03 Tx Erlang	35 count/10m	16 count/10m	20 count/10m
1753548350	0.04 Rx Erlang	0.02 Tx Erlang	37 count/10m	18 count/10m	19 count/10m
1753547150	0.03 Rx Erlang	0.02 Tx Erlang	31 count/10m	15 count/10m	20 count/10m
1753545950	0.04 Rx Erlang	0.02 Tx Erlang	35 count/10m	18 count/10m	20 count/10m
1753544750	0.04 Rx Erlang	0.02 Tx Erlang	33 count/10m	16 count/10m	18 count/10m
1753543550	0.03 Rx Erlang	0.02 Tx Erlang	25 count/10m	15 count/10m	19 count/10m
1753542350	0.04 Rx Erlang	0.03 Tx Erlang	27 count/10m	14 count/10m	19 count/10m
1753541150	0.04 Rx Erlang	0.02 Tx Erlang	37 count/10m	19 count/10m	21 count/10m
1753539950	0.05 Rx Erlang	0.03 Tx Erlang	56 count/10m	25 count/10m	33 count/10m
1753538750	0.05 Rx Erlang	0.03 Tx Erlang	45 count/10m	24 count/10m	28 count/10m
1753537550	0.05 Rx Erlang	0.03 Tx Erlang	43 count/10m	20 count/10m	29 count/10m
1753536350	0.04 Rx Erlang	0.03 Tx Erlang	33 count/10m	21 count/10m	25 count/10m
1753535150	0.04 Rx Erlang	0.03 Tx Erlang	33 count/10m	19 count/10m	25 count/10m
1753533950	0.04 Rx Erlang	0.03 Tx Erlang	40 count/10m	19 count/10m	29 count/10m
1753532750	0.04 Rx Erlang	0.03 Tx Erlang	33 count/10m	18 count/10m	23 count/10m
1753529150	0.04 Rx Erlang	0.04 Tx Erlang	35 count/10m	24 count/10m	30 count/10m
1753526750	0.04 Rx Erlang	0.03 Tx Erlang	38 count/10m	22 count/10m	26 count/10m
1753525550	0.03 Rx Erlang	0.03 Tx Erlang	29 count/10m	20 count/10m	26 count/10m
1753524350	0.04 Rx Erlang	0.04 Tx Erlang	44 count/10m	16 count/10m	34 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)