LZ0BOT Telemetry

This is the latest recevied telemetry packets stored in our database for station/object LZ0BOT. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	EffTo*	Temp*
1780544733	12.75 Volt	350 Pkt	40 Pkt	61 Pcnt	22.2 C
1780544729	12.75 Volt	350 Pkt	40 Pkt	61 Pcnt	22.2 C
1780544129	12.75 Volt	340 Pkt	40 Pkt	61 Pcnt	22.2 C
1780543529	12.75 Volt	340 Pkt	40 Pkt	61 Pcnt	22.2 C
1780542929	12.75 Volt	330 Pkt	40 Pkt	61 Pcnt	22.2 C
1780542329	12.75 Volt	310 Pkt	40 Pkt	61 Pcnt	22.2 C
1780541729	12.75 Volt	320 Pkt	60 Pkt	61 Pcnt	22.2 C
1780541133	12.75 Volt	300 Pkt	50 Pkt	61 Pcnt	22.2 C
1780541129	12.75 Volt	300 Pkt	50 Pkt	61 Pcnt	22.2 C
1780540529	12.75 Volt	310 Pkt	50 Pkt	61 Pcnt	22.2 C
1780539929	12.75 Volt	310 Pkt	50 Pkt	61 Pcnt	22.2 C
1780539329	12.75 Volt	300 Pkt	50 Pkt	61 Pcnt	22.2 C
1780538729	12.75 Volt	310 Pkt	40 Pkt	61 Pcnt	22.2 C
1780538129	12.75 Volt	300 Pkt	40 Pkt	61 Pcnt	22.2 C
1780537533	12.75 Volt	300 Pkt	40 Pkt	61 Pcnt	22.2 C
1780537529	12.75 Volt	300 Pkt	40 Pkt	61 Pcnt	22.2 C
1780536929	12.75 Volt	320 Pkt	30 Pkt	61 Pcnt	22.2 C
1780536329	12.75 Volt	320 Pkt	40 Pkt	61 Pcnt	22.2 C
1780535729	12.75 Volt	320 Pkt	40 Pkt	61 Pcnt	22.2 C
1780535129	12.75 Volt	310 Pkt	40 Pkt	61 Pcnt	22.2 C
1780534529	12.75 Volt	270 Pkt	30 Pkt	61 Pcnt	22.2 C
1780533933	12.75 Volt	230 Pkt	30 Pkt	61 Pcnt	22.2 C
1780533929	12.75 Volt	230 Pkt	30 Pkt	61 Pcnt	22.2 C
1780533329	12.75 Volt	210 Pkt	30 Pkt	61 Pcnt	22.2 C
1780532729	12.75 Volt	220 Pkt	30 Pkt	61 Pcnt	22.2 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

EffTo: 0, 1, 0

Temp: 0, 0.147, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)