YO6ZO-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YO6ZO-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1753450330	12.83 Volt	0 Pkt	0 Pkt	60 Pcnt
1753444925	12.83 Volt	0 Pkt	0 Pkt	100 Pcnt
1753122914	2.48 Volt	250 Pkt	230 Pkt	20 Pcnt
1753120914	2.48 Volt	250 Pkt	230 Pkt	20 Pcnt
1753034804	2.4 Volt	240 Pkt	230 Pkt	20 Pcnt
1753031691	2.48 Volt	240 Pkt	230 Pkt	20 Pcnt
1753029691	2.48 Volt	240 Pkt	230 Pkt	20 Pcnt
1753027691	2.48 Volt	240 Pkt	230 Pkt	20 Pcnt
1752910613	2.4 Volt	240 Pkt	230 Pkt	20 Pcnt
1752908616	2.4 Volt	240 Pkt	230 Pkt	20 Pcnt
1752905932	2.48 Volt	240 Pkt	230 Pkt	20 Pcnt
1752903932	2.4 Volt	240 Pkt	230 Pkt	20 Pcnt
1752901932	2.4 Volt	240 Pkt	230 Pkt	20 Pcnt
1752899932	2.4 Volt	240 Pkt	230 Pkt	20 Pcnt
1752897932	2.4 Volt	240 Pkt	230 Pkt	20 Pcnt
1752895932	2.4 Volt	240 Pkt	230 Pkt	20 Pcnt
1752893932	2.4 Volt	240 Pkt	230 Pkt	20 Pcnt
1752891932	2.48 Volt	250 Pkt	230 Pkt	20 Pcnt
1752889932	2.48 Volt	250 Pkt	230 Pkt	20 Pcnt
1752887932	2.48 Volt	250 Pkt	230 Pkt	20 Pcnt
1752885932	2.48 Volt	250 Pkt	230 Pkt	20 Pcnt
1752883932	2.4 Volt	240 Pkt	230 Pkt	20 Pcnt
1752881932	2.4 Volt	240 Pkt	230 Pkt	20 Pcnt
1752879932	2.48 Volt	250 Pkt	230 Pkt	20 Pcnt
1752877932	2.4 Volt	240 Pkt	230 Pkt	20 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)