DH1NSP-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DH1NSP-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX*	RX*	Digi*	V_Bat*	V_Ext*
1780574452	0 Count	796 Count	0 Count	0 VDC	0 VDC
1780572652	0 Count	795 Count	0 Count	0 VDC	0 VDC
1780570852	0 Count	794 Count	0 Count	0 VDC	0 VDC
1780569052	0 Count	793 Count	0 Count	0 VDC	0 VDC
1780567252	0 Count	792 Count	0 Count	0 VDC	0 VDC
1780565452	0 Count	791 Count	0 Count	0 VDC	0 VDC
1780563652	0 Count	790 Count	0 Count	0 VDC	0 VDC
1780561852	0 Count	789 Count	0 Count	0 VDC	0 VDC
1780560036	0 Count	788 Count	0 Count	0 VDC	0 VDC
1780558236	0 Count	787 Count	0 Count	0 VDC	0 VDC
1780556436	0 Count	786 Count	0 Count	0 VDC	0 VDC
1780554636	0 Count	785 Count	0 Count	0 VDC	0 VDC
1780552836	0 Count	784 Count	0 Count	0 VDC	0 VDC
1780551036	0 Count	783 Count	0 Count	0 VDC	0 VDC
1780549236	0 Count	782 Count	0 Count	0 VDC	0 VDC
1780547436	0 Count	781 Count	0 Count	0 VDC	0 VDC
1780545636	0 Count	780 Count	0 Count	0 VDC	0 VDC
1780543835	0 Count	779 Count	0 Count	0 VDC	0 VDC
1780542035	0 Count	778 Count	0 Count	0 VDC	0 VDC
1780540235	0 Count	777 Count	0 Count	0 VDC	0 VDC
1780538435	0 Count	776 Count	0 Count	0 VDC	0 VDC
1780536635	0 Count	775 Count	0 Count	0 VDC	0 VDC
1780534834	0 Count	774 Count	0 Count	0 VDC	0 VDC
1780533034	0 Count	773 Count	0 Count	0 VDC	0 VDC
1780531234	0 Count	772 Count	0 Count	0 VDC	0 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)