BR9AA-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object BR9AA-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RF->INET*	Repeater*	AllCount*
1757479998	65 Pkts	2 Pkts	2 Pkts
1757479399	81 Pkts	0 Pkts	0 Pkts
1757478798	67 Pkts	0 Pkts	0 Pkts
1757478198	107 Pkts	1 Pkts	1 Pkts
1757477599	77 Pkts	0 Pkts	0 Pkts
1757476998	95 Pkts	0 Pkts	1 Pkts
1757476398	64 Pkts	1 Pkts	1 Pkts
1757475798	73 Pkts	1 Pkts	1 Pkts
1757475198	61 Pkts	0 Pkts	0 Pkts
1757474598	82 Pkts	1 Pkts	1 Pkts
1757473998	68 Pkts	0 Pkts	0 Pkts
1757473398	81 Pkts	0 Pkts	0 Pkts
1757472798	74 Pkts	0 Pkts	0 Pkts
1757472198	78 Pkts	0 Pkts	0 Pkts
1757412330	66 Pkts	1 Pkts	2 Pkts
1757411730	58 Pkts	0 Pkts	0 Pkts
1757411130	85 Pkts	1 Pkts	1 Pkts
1757410530	92 Pkts	0 Pkts	0 Pkts
1757409930	78 Pkts	0 Pkts	0 Pkts
1757409330	56 Pkts	1 Pkts	1 Pkts
1757408730	100 Pkts	0 Pkts	2 Pkts
1757408130	61 Pkts	0 Pkts	0 Pkts
1757407530	75 Pkts	0 Pkts	0 Pkts
1757406929	135 Pkts	0 Pkts	0 Pkts
1757406376	15 Pkts	0 Pkts	0 Pkts

*Used Equation Coefficients:

RF->INET: 0, 1, 0

INET->RF: 0, 1, 0

Repeater: 0, 1, 0

AllCount: 0, 1, 0

AllDrop: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)