VK2HIM-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK2HIM-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Eff1h*	Eftot*
1773480550	13.68 Volt	160 Pkt	94 Pcnt	87 Pcnt
1773478750	13.68 Volt	140 Pkt	94 Pcnt	87 Pcnt
1773476961	13.68 Volt	130 Pkt	97 Pcnt	87 Pcnt
1773475150	13.68 Volt	130 Pkt	94 Pcnt	87 Pcnt
1773473350	13.68 Volt	140 Pkt	93 Pcnt	87 Pcnt
1773471550	13.68 Volt	130 Pkt	97 Pcnt	87 Pcnt
1773469750	13.68 Volt	150 Pkt	97 Pcnt	86 Pcnt
1773467950	13.68 Volt	160 Pkt	97 Pcnt	86 Pcnt
1773466150	13.68 Volt	140 Pkt	92 Pcnt	86 Pcnt
1773464350	13.68 Volt	130 Pkt	86 Pcnt	86 Pcnt
1773462550	13.68 Volt	130 Pkt	83 Pcnt	86 Pcnt
1773460750	13.68 Volt	140 Pkt	80 Pcnt	86 Pcnt
1773458951	13.68 Volt	150 Pkt	77 Pcnt	86 Pcnt
1773457151	13.68 Volt	180 Pkt	80 Pcnt	86 Pcnt
1773455351	13.68 Volt	170 Pkt	86 Pcnt	86 Pcnt
1773453551	13.68 Volt	160 Pkt	92 Pcnt	86 Pcnt
1773451751	13.68 Volt	140 Pkt	97 Pcnt	86 Pcnt
1773449951	13.68 Volt	130 Pkt	98 Pcnt	86 Pcnt
1773448151	13.68 Volt	140 Pkt	92 Pcnt	86 Pcnt
1773446351	13.68 Volt	130 Pkt	82 Pcnt	86 Pcnt
1773444551	13.68 Volt	120 Pkt	73 Pcnt	86 Pcnt
1773442751	13.68 Volt	160 Pkt	80 Pcnt	86 Pcnt
1773440951	13.68 Volt	230 Pkt	84 Pcnt	86 Pcnt
1773439151	13.68 Volt	240 Pkt	86 Pcnt	86 Pcnt
1773437351	13.68 Volt	230 Pkt	91 Pcnt	86 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.074737, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Eftot: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)