SNOWMS Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SNOWMS. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1757463715	14.3 Volt	190 Pkt	40 Pkt	69 Pcnt
1757463115	14.3 Volt	210 Pkt	50 Pkt	70 Pcnt
1757462525	14.3 Volt	210 Pkt	50 Pkt	70 Pcnt
1757461915	14.3 Volt	190 Pkt	40 Pkt	69 Pcnt
1757461315	14.3 Volt	180 Pkt	40 Pkt	72 Pcnt
1757460715	14.3 Volt	150 Pkt	40 Pkt	67 Pcnt
1757460115	14.3 Volt	130 Pkt	20 Pkt	58 Pcnt
1757459515	14.3 Volt	130 Pkt	20 Pkt	53 Pcnt
1757458915	14.3 Volt	150 Pkt	20 Pkt	53 Pcnt
1757458315	14.3 Volt	160 Pkt	20 Pkt	50 Pcnt
1757457715	14.3 Volt	180 Pkt	20 Pkt	50 Pcnt
1757457115	14.3 Volt	180 Pkt	30 Pkt	48 Pcnt
1757456515	14.3 Volt	180 Pkt	20 Pkt	46 Pcnt
1757455915	14.3 Volt	170 Pkt	20 Pkt	43 Pcnt
1757455316	14.3 Volt	160 Pkt	20 Pkt	40 Pcnt
1757454715	14.3 Volt	150 Pkt	20 Pkt	40 Pcnt
1757454115	14.3 Volt	150 Pkt	20 Pkt	39 Pcnt
1757453516	14.3 Volt	150 Pkt	20 Pkt	41 Pcnt
1757452916	13.75 Volt	150 Pkt	20 Pkt	44 Pcnt
1757452315	14.3 Volt	150 Pkt	30 Pkt	46 Pcnt
1757451716	14.3 Volt	160 Pkt	30 Pkt	51 Pcnt
1757451116	14.3 Volt	160 Pkt	20 Pkt	51 Pcnt
1757450526	14.3 Volt	170 Pkt	30 Pkt	57 Pcnt
1757449916	14.3 Volt	170 Pkt	30 Pkt	62 Pcnt
1757449316	14.3 Volt	190 Pkt	40 Pkt	65 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)