K3JML-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object K3JML-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	CbTmp*
1784698082	13.88 Volt	420 Pkt	120 Pkt	78 Pcnt	66.2 F
1784696282	13.88 Volt	460 Pkt	120 Pkt	83 Pcnt	66.2 F
1784694483	13.88 Volt	480 Pkt	120 Pkt	85 Pcnt	66.2 F
1784692682	13.88 Volt	450 Pkt	110 Pkt	81 Pcnt	66.2 F
1784690882	13.88 Volt	440 Pkt	120 Pkt	78 Pcnt	67.1 F
1784689083	13.88 Volt	460 Pkt	130 Pkt	83 Pcnt	67.1 F
1784688182	13.73 Volt	470 Pkt	130 Pkt	87 Pcnt	66.2 F
1784687282	13.88 Volt	480 Pkt	140 Pkt	87 Pcnt	67.1 F
1784685482	13.88 Volt	520 Pkt	140 Pkt	84 Pcnt	67.1 F
1784684584	13.65 Volt	520 Pkt	140 Pkt	84 Pcnt	67.1 F
1784683683	13.88 Volt	510 Pkt	130 Pkt	84 Pcnt	68 F
1784682784	13.88 Volt	530 Pkt	140 Pkt	86 Pcnt	68 F
1784681883	13.8 Volt	540 Pkt	140 Pkt	88 Pcnt	67.1 F
1784680083	13.88 Volt	540 Pkt	140 Pkt	88 Pcnt	66.2 F
1784679185	13.65 Volt	540 Pkt	130 Pkt	90 Pcnt	67.1 F
1784678284	13.88 Volt	530 Pkt	130 Pkt	89 Pcnt	67.1 F
1784677384	13.88 Volt	510 Pkt	130 Pkt	85 Pcnt	67.1 F
1784676484	13.88 Volt	470 Pkt	130 Pkt	78 Pcnt	67.1 F
1784674683	13.88 Volt	440 Pkt	120 Pkt	71 Pcnt	67.1 F
1784673784	13.8 Volt	470 Pkt	120 Pkt	70 Pcnt	67.1 F
1784672883	13.88 Volt	510 Pkt	120 Pkt	73 Pcnt	67.1 F
1784671984	13.65 Volt	570 Pkt	130 Pkt	75 Pcnt	67.1 F
1784671083	13.88 Volt	630 Pkt	150 Pkt	79 Pcnt	67.1 F
1784670184	13.65 Volt	620 Pkt	150 Pkt	83 Pcnt	67.1 F
1784669283	13.88 Volt	610 Pkt	150 Pkt	84 Pcnt	67.1 F

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

CbTmp: 0, 0.9, -83.2

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)