EA5SW-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object EA5SW-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX*	RX*	Digi*	V_Bat*	V_Ext*
1765547371	0 Count	413 Count	0 Count	0 VDC	0 VDC
1765545570	0 Count	413 Count	0 Count	0 VDC	0 VDC
1765543770	0 Count	392 Count	0 Count	0 VDC	0 VDC
1765541991	0 Count	368 Count	0 Count	0 VDC	0 VDC
1765540170	0 Count	351 Count	0 Count	0 VDC	0 VDC
1765538369	0 Count	324 Count	0 Count	0 VDC	0 VDC
1765536584	0 Count	303 Count	0 Count	0 VDC	0 VDC
1765536222	0 Count	303 Count	0 Count	0 VDC	0 VDC
1765534422	0 Count	303 Count	0 Count	0 VDC	0 VDC
1765532622	0 Count	303 Count	0 Count	0 VDC	0 VDC
1765530822	0 Count	303 Count	0 Count	0 VDC	0 VDC
1765529022	0 Count	290 Count	0 Count	0 VDC	0 VDC
1765527222	0 Count	260 Count	0 Count	0 VDC	0 VDC
1765525422	0 Count	259 Count	0 Count	0 VDC	0 VDC
1765523622	0 Count	259 Count	0 Count	0 VDC	0 VDC
1765521822	0 Count	259 Count	0 Count	0 VDC	0 VDC
1765520022	0 Count	259 Count	0 Count	0 VDC	0 VDC
1765518222	0 Count	259 Count	0 Count	0 VDC	0 VDC
1765516422	0 Count	259 Count	0 Count	0 VDC	0 VDC
1765514622	0 Count	259 Count	0 Count	0 VDC	0 VDC
1765512822	0 Count	259 Count	0 Count	0 VDC	0 VDC
1765511022	0 Count	259 Count	0 Count	0 VDC	0 VDC
1765509222	0 Count	259 Count	0 Count	0 VDC	0 VDC
1765507421	0 Count	259 Count	0 Count	0 VDC	0 VDC
1765505621	0 Count	259 Count	0 Count	0 VDC	0 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)