IR2ZZW-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IR2ZZW-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx10m*	Rx1h*	Eff1h*	Dg1h*
1780355088	13.5 Volt	7 Pkt	60 Pkt	90 Pcnt	0 Pkt
1780256090	13.5 Volt	6 Pkt	50 Pkt	85 Pcnt	10 Pkt
1780255790	13.5 Volt	8 Pkt	50 Pkt	84 Pcnt	10 Pkt
1780255490	13.5 Volt	5 Pkt	50 Pkt	83 Pcnt	10 Pkt
1780255190	13.5 Volt	12 Pkt	60 Pkt	83 Pcnt	10 Pkt
1780254890	13.5 Volt	14 Pkt	60 Pkt	84 Pcnt	10 Pkt
1780254590	13.5 Volt	5 Pkt	50 Pkt	85 Pcnt	10 Pkt
1780254290	13.5 Volt	6 Pkt	50 Pkt	85 Pcnt	10 Pkt
1780253990	13.5 Volt	9 Pkt	50 Pkt	85 Pcnt	10 Pkt
1780253690	13.5 Volt	7 Pkt	60 Pkt	85 Pcnt	10 Pkt
1780253411	13.5 Volt	10 Pkt	60 Pkt	87 Pcnt	10 Pkt
1780253090	13.5 Volt	13 Pkt	60 Pkt	85 Pcnt	10 Pkt
1780252790	13.5 Volt	8 Pkt	60 Pkt	85 Pcnt	10 Pkt
1780252490	13.5 Volt	5 Pkt	60 Pkt	86 Pcnt	10 Pkt
1780252190	13.5 Volt	11 Pkt	60 Pkt	88 Pcnt	10 Pkt
1780251890	13.5 Volt	8 Pkt	60 Pkt	90 Pcnt	10 Pkt
1780251590	13.5 Volt	9 Pkt	60 Pkt	90 Pcnt	10 Pkt
1780251290	13.5 Volt	12 Pkt	60 Pkt	90 Pcnt	10 Pkt
1780250990	13.5 Volt	6 Pkt	60 Pkt	90 Pcnt	0 Pkt
1780250690	13.5 Volt	9 Pkt	60 Pkt	88 Pcnt	0 Pkt
1780250390	13.5 Volt	10 Pkt	60 Pkt	90 Pcnt	0 Pkt
1780250090	13.5 Volt	6 Pkt	60 Pkt	91 Pcnt	0 Pkt
1780249790	13.5 Volt	10 Pkt	60 Pkt	92 Pcnt	10 Pkt
1780249490	13.5 Volt	16 Pkt	60 Pkt	94 Pcnt	10 Pkt
1780249190	13.5 Volt	9 Pkt	60 Pkt	95 Pcnt	10 Pkt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Eff1h: 0, 1, 0

Dg1h: 0, 10, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)