DF0OH-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DF0OH-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Batt12V*	Batt48V*	I48V*	Umin*	Cell#*
1757752153	13.65 V	47.98 V	-99.9 A	2.03 V	17 #
1757751220	13.65 V	47.92 V	-99.9 A	2.03 V	17 #
1757750276	13.65 V	47.95 V	-99.9 A	2.03 V	17 #
1757749300	13.65 V	47.96 V	-99.9 A	2.03 V	17 #
1757748397	13.65 V	47.99 V	-99.9 A	2.03 V	17 #
1757747442	13.65 V	47.86 V	-99.9 A	2.03 V	17 #
1757746510	13.65 V	47.76 V	-99.9 A	2.03 V	17 #
1757745545	13.65 V	47.8 V	-99.9 A	2.03 V	17 #
1757744622	13.65 V	47.76 V	-99.9 A	2.03 V	17 #
1757743688	13.65 V	47.79 V	-99.9 A	2.03 V	17 #
1757742734	13.65 V	47.8 V	-99.9 A	2.03 V	17 #
1757741737	13.65 V	47.81 V	-99.9 A	2.03 V	17 #
1757740813	13.65 V	47.79 V	-99.9 A	2.03 V	17 #
1757739848	13.65 V	47.64 V	-99.9 A	2.03 V	17 #
1757738926	13.65 V	47.64 V	-99.9 A	2.03 V	17 #
1757737971	13.65 V	47.68 V	-99.9 A	2.03 V	17 #
1757737070	13.65 V	47.69 V	-99.9 A	2.03 V	17 #
1757736103	13.65 V	47.73 V	-99.9 A	2.03 V	17 #
1757735094	13.65 V	47.74 V	-99.9 A	2.03 V	17 #
1757734138	13.65 V	47.75 V	-99.9 A	2.03 V	17 #
1757733205	13.65 V	47.79 V	-99.9 A	2.03 V	17 #
1757732262	13.65 V	47.8 V	-99.9 A	2.03 V	17 #
1757731317	13.65 V	47.83 V	-99.9 A	2.03 V	17 #
1757730385	13.65 V	47.86 V	-99.9 A	2.03 V	17 #
1757729463	13.65 V	47.86 V	-99.9 A	2.03 V	17 #

*Used Equation Coefficients:

Batt12V: 0, 0.01, 0

Batt48V: 0, 0.01, 0

I48V: 0, 0.01, -100

Umin: 0, 0.01, 0

Cell#: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)