APRS Track Direct

My position About ☰

reset

KC2SYF-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KC2SYF-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RFIn*	RFiGate*	DigiRpt*	Temp*
1749793040	121 Pkts	114 Pkts	34 Pkts	26 C
1749789440	153 Pkts	137 Pkts	39 Pkts	26 C
1749785841	145 Pkts	136 Pkts	44 Pkts	26 C
1749782239	158 Pkts	144 Pkts	41 Pkts	26 C
1749778639	160 Pkts	149 Pkts	50 Pkts	26 C
1749775039	162 Pkts	154 Pkts	50 Pkts	26 C
1749771441	165 Pkts	154 Pkts	46 Pkts	26 C
1749767839	168 Pkts	160 Pkts	49 Pkts	26 C
1749764241	198 Pkts	192 Pkts	55 Pkts	26 C
1749760641	125 Pkts	117 Pkts	36 Pkts	26 C
1749757041	110 Pkts	104 Pkts	30 Pkts	26 C
1749753440	91 Pkts	85 Pkts	31 Pkts	26 C
1749749840	110 Pkts	102 Pkts	27 Pkts	26 C
1749746240	129 Pkts	121 Pkts	42 Pkts	26 C
1749742640	156 Pkts	151 Pkts	50 Pkts	26 C
1749739041	187 Pkts	182 Pkts	37 Pkts	26 C
1749735440	137 Pkts	132 Pkts	36 Pkts	26 C
1749728241	159 Pkts	148 Pkts	32 Pkts	26 C
1749724673	130 Pkts	124 Pkts	34 Pkts	26 C
1749721040	119 Pkts	107 Pkts	34 Pkts	26 C
1749717441	147 Pkts	136 Pkts	47 Pkts	26 C
1749713841	165 Pkts	157 Pkts	58 Pkts	26 C
1749710240	139 Pkts	131 Pkts	52 Pkts	26 C
1749706640	124 Pkts	119 Pkts	46 Pkts	26 C
1749703040	162 Pkts	152 Pkts	43 Pkts	26 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)

Select date and time to show map data for (enter time for your locale time zone). The regular time length select box can still be used to select how old data that should be shown (relative to selected date and time).

*Note that the heatmap will still based on data from the latest hour (not the selected date and time).

Date and time: