IT9CYW-9 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IT9CYW-9. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Celsius*	Rel_Hum*	Atm_Press*
1776442031	21.8 C	49.34 %	1018 hPa
1776441127	22.4 C	49.03 %	1017.5 hPa
1776439320	23.7 C	47.42 %	1018.13 hPa
1776438416	23.5 C	46.56 %	1018.38 hPa
1776437512	23.4 C	47.21 %	1018 hPa
1776436608	23.4 C	47.17 %	1018.25 hPa
1776435704	23.4 C	48.26 %	1017.63 hPa
1776434802	23.4 C	48.6 %	1018.13 hPa
1776433896	23.4 C	46.43 %	1018.63 hPa
1776432992	23.5 C	43.85 %	1018.63 hPa
1776432089	23.2 C	43.4 %	1018.75 hPa
1776431185	23.2 C	43.41 %	1019.63 hPa
1776430280	23.2 C	42 %	1019 hPa
1776429376	23.4 C	41.88 %	1018.75 hPa
1776428473	23.4 C	42.44 %	1018.88 hPa
1776427569	23.3 C	43.76 %	1019.5 hPa
1776426665	23.6 C	46.18 %	1019.5 hPa
1776425761	23.3 C	47.07 %	1019.13 hPa
1776424857	23.1 C	47.42 %	1019.75 hPa
1776423953	23 C	46.82 %	1019.88 hPa
1776423048	23.2 C	49.37 %	1019.38 hPa
1776422144	23.2 C	49.92 %	1019.25 hPa
1776421240	22.9 C	49.49 %	1019.25 hPa
1776420336	22.7 C	50.17 %	1020.13 hPa
1776419415	20 C	55.73 %	980.13 hPa

*Used Equation Coefficients:

Celsius: 0, 0.1, -50

Rel_Hum: 0, 0.01, 0

Atm_Press: 0, 0.125, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)