DL1KPA-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DL1KPA-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	QNH*	Temp.out*
1761511734	993.4 hPa	10.2 C deg	1006.6 hPa	0 C deg
1761509934	994.1 hPa	10.4 C deg	1007.3 hPa	0 C deg
1761508141	994.2 hPa	10.6 C deg	1007.4 hPa	0 C deg
1761504544	994.6 hPa	10.9 C deg	1007.8 hPa	0 C deg
1761502735	995.1 hPa	11.1 C deg	1008.3 hPa	0 C deg
1761499134	995.3 hPa	11.9 C deg	1008.5 hPa	0 C deg
1761497333	995.5 hPa	12.4 C deg	1008.7 hPa	0 C deg
1761495533	995.4 hPa	13.2 C deg	1008.5 hPa	0 C deg
1761493733	995.3 hPa	14.2 C deg	1008.4 hPa	0 C deg
1761491933	995.2 hPa	15.3 C deg	1008.2 hPa	0 C deg
1761490133	995.1 hPa	15.7 C deg	1008.1 hPa	0 C deg
1761484733	995 hPa	15.6 C deg	1008 hPa	0 C deg
1761482932	994.8 hPa	14.8 C deg	1007.8 hPa	0 C deg
1761481132	994.6 hPa	13.6 C deg	1007.7 hPa	0 C deg
1761479332	994.8 hPa	12.9 C deg	1007.9 hPa	0 C deg
1761477532	994.8 hPa	12.2 C deg	1007.9 hPa	0 C deg
1761472131	994.2 hPa	11.8 C deg	1007.3 hPa	0 C deg
1761470336	993.7 hPa	11.4 C deg	1006.8 hPa	0 C deg
1761466731	993.3 hPa	8.7 C deg	1006.6 hPa	0 C deg
1761464931	993.2 hPa	8.1 C deg	1006.5 hPa	0 C deg
1761463131	992.8 hPa	7.8 C deg	1006.1 hPa	0 C deg
1761461331	992.4 hPa	7.7 C deg	1005.7 hPa	0 C deg
1761459530	992.1 hPa	7.5 C deg	1005.5 hPa	0 C deg
1761457730	991.9 hPa	7.6 C deg	1005.2 hPa	0 C deg
1761455932	991.8 hPa	7.5 C deg	1005.1 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)