Overview Statistics Trail Chart Weather Telemetry Raw packets
 

This is the latest recevied telemetry packets stored in our database for station/object AE4BA. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>
Time Cpu* Temp* FreeM* RxP* TxP*
1765496592 0.14 Load 27.8 DegC 997 Mb 3120 Pkt 1502 Pkt
1765496293 0.1 Load 27.8 DegC 1005 Mb 1248 Pkt 426 Pkt
1765495992 0.07 Load 27.8 DegC 1014 Mb 1329 Pkt 534 Pkt
1765495693 0.06 Load 27.8 DegC 1002 Mb 1249 Pkt 421 Pkt
1765495392 0.08 Load 27.8 DegC 1005 Mb 1362 Pkt 447 Pkt
1765495093 0.08 Load 27.8 DegC 1017 Mb 1709 Pkt 423 Pkt
1765494793 0.05 Load 27.8 DegC 1022 Mb 1179 Pkt 387 Pkt
1765494492 0.06 Load 27.8 DegC 998 Mb 1247 Pkt 420 Pkt
1765494193 0.08 Load 27.8 DegC 1019 Mb 1289 Pkt 507 Pkt
1765493892 0.08 Load 27.8 DegC 1013 Mb 1170 Pkt 362 Pkt
1765493593 0.07 Load 27.8 DegC 1026 Mb 1175 Pkt 366 Pkt
1765493292 0.06 Load 27.8 DegC 1024 Mb 1185 Pkt 349 Pkt
1765492992 0.11 Load 27.8 DegC 1006 Mb 1162 Pkt 369 Pkt
1765492392 0.13 Load 27.8 DegC 1013 Mb 1376 Pkt 593 Pkt
1765492097 0.14 Load 27.8 DegC 1024 Mb 1186 Pkt 372 Pkt
1765491792 0.19 Load 27.8 DegC 1030 Mb 1201 Pkt 371 Pkt
1765491493 0.4 Load 27.8 DegC 1014 Mb 1376 Pkt 348 Pkt
1765491193 0.05 Load 27.8 DegC 1006 Mb 1703 Pkt 372 Pkt
1765490892 0.08 Load 27.8 DegC 1011 Mb 1690 Pkt 443 Pkt
1765490593 0.11 Load 27.8 DegC 1024 Mb 1407 Pkt 455 Pkt
1765490292 0.07 Load 27.8 DegC 1022 Mb 1257 Pkt 397 Pkt
1765489993 0.11 Load 27.8 DegC 1012 Mb 1210 Pkt 389 Pkt
1765489692 0.2 Load 27.8 DegC 1021 Mb 1259 Pkt 412 Pkt
1765489093 0.2 Load 27.8 DegC 1032 Mb 1378 Pkt 418 Pkt
1765488792 0.14 Load 27.8 DegC 1013 Mb 1461 Pkt 626 Pkt
*Used Equation Coefficients:
Cpu: 0, 0.001, 0
Temp: 0, 0.001, 0
FreeM: 0, 1, 0
RxP: 0, 1, 0
TxP: 0, 1, 0

  • The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
  • Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
    The sent equation coefficients is used in the equation: a * value2 + b * value + c.
  • The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
  • The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
  • All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
  • A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)