TA1KRB-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA1KRB-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1780566698	81 Pkt	0 Pkt	4 Pkt	-28 dBm	8.94 V
1780565908	8 Pkt	0 Pkt	1 Pkt	-28 dBm	8.94 V
1780565397	73 Pkt	14 Pkt	13 Pkt	-23 dBm	8.94 V
1780564607	80 Pkt	3 Pkt	2 Pkt	-25 dBm	8.94 V
1780563817	84 Pkt	5 Pkt	4 Pkt	-24 dBm	8.94 V
1780563026	70 Pkt	2 Pkt	1 Pkt	-24 dBm	8.94 V
1780562236	90 Pkt	6 Pkt	3 Pkt	-23 dBm	8.94 V
1780561446	95 Pkt	6 Pkt	3 Pkt	-23 dBm	8.94 V
1780560656	84 Pkt	2 Pkt	4 Pkt	-23 dBm	8.94 V
1780559866	94 Pkt	1 Pkt	1 Pkt	-24 dBm	8.94 V
1780559076	81 Pkt	3 Pkt	4 Pkt	-25 dBm	8.94 V
1780558286	82 Pkt	3 Pkt	6 Pkt	-26 dBm	8.92 V
1780557496	91 Pkt	5 Pkt	8 Pkt	-23 dBm	8.94 V
1780556706	93 Pkt	0 Pkt	0 Pkt	-23 dBm	8.94 V
1780555126	8 Pkt	0 Pkt	0 Pkt	-26 dBm	8.92 V
1780554524	77 Pkt	0 Pkt	0 Pkt	-26 dBm	8.92 V
1780553734	80 Pkt	0 Pkt	0 Pkt	-26 dBm	8.94 V
1780552944	84 Pkt	0 Pkt	0 Pkt	-26 dBm	8.94 V
1780552154	68 Pkt	0 Pkt	0 Pkt	-26 dBm	8.94 V
1780551364	10 Pkt	0 Pkt	0 Pkt	-26 dBm	8.94 V
1780550574	22 Pkt	0 Pkt	0 Pkt	-26 dBm	8.94 V
1780549783	44 Pkt	0 Pkt	0 Pkt	-24 dBm	8.96 V
1780548994	90 Pkt	0 Pkt	0 Pkt	-24 dBm	8.94 V
1780548203	79 Pkt	0 Pkt	0 Pkt	-24 dBm	8.94 V
1780547413	87 Pkt	0 Pkt	0 Pkt	-23 dBm	8.94 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)