ON0TVO Telemetry

This is the latest recevied telemetry packets stored in our database for station/object ON0TVO. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Rx1h*	Dg1h*	Eff1h*	Eff*
1761531550	9 C	390 Pkt	80 Pkt	77 Pcnt	64 Pcnt
1761530945	9.5 C	400 Pkt	80 Pkt	78 Pcnt	64 Pcnt
1761530345	10 C	410 Pkt	90 Pkt	78 Pcnt	64 Pcnt
1761529745	10 C	410 Pkt	90 Pkt	79 Pcnt	64 Pcnt
1761529146	10 C	420 Pkt	90 Pkt	81 Pcnt	64 Pcnt
1761528545	10 C	410 Pkt	90 Pkt	79 Pcnt	64 Pcnt
1761527951	9.5 C	400 Pkt	90 Pkt	79 Pcnt	64 Pcnt
1761527346	9.5 C	390 Pkt	80 Pkt	76 Pcnt	64 Pcnt
1761526747	9.5 C	380 Pkt	80 Pkt	74 Pcnt	64 Pcnt
1761526146	9.5 C	380 Pkt	80 Pkt	74 Pcnt	64 Pcnt
1761525546	9 C	370 Pkt	80 Pkt	73 Pcnt	64 Pcnt
1761524948	9 C	370 Pkt	80 Pkt	72 Pcnt	64 Pcnt
1761524355	9 C	370 Pkt	80 Pkt	74 Pcnt	64 Pcnt
1761523746	9 C	380 Pkt	80 Pkt	76 Pcnt	64 Pcnt
1761523146	8.5 C	410 Pkt	80 Pkt	77 Pcnt	64 Pcnt
1761522546	8.5 C	420 Pkt	80 Pkt	78 Pcnt	64 Pcnt
1761521946	8 C	430 Pkt	80 Pkt	80 Pcnt	64 Pcnt
1761521346	8 C	450 Pkt	70 Pkt	79 Pcnt	64 Pcnt
1761520755	8 C	450 Pkt	80 Pkt	78 Pcnt	64 Pcnt
1761520146	8 C	450 Pkt	80 Pkt	77 Pcnt	64 Pcnt
1761519547	8 C	450 Pkt	90 Pkt	77 Pcnt	64 Pcnt
1761518946	8 C	450 Pkt	90 Pkt	77 Pcnt	64 Pcnt
1761518347	8 C	460 Pkt	90 Pkt	76 Pcnt	64 Pcnt
1761517749	8 C	440 Pkt	90 Pkt	76 Pcnt	64 Pcnt
1761517146	8 C	430 Pkt	90 Pkt	77 Pcnt	64 Pcnt

*Used Equation Coefficients:

Temp: 0, 0.5, -64

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)