HS6AZ Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS6AZ. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	PM1.0*	PM2.5*	PM10*	RSSI*	Voltage*
1761594417	23 ug/m3	28 ug/m3	40 ug/m3	-42 dBm	0.12 V
1761594095	21 ug/m3	26 ug/m3	35 ug/m3	-40 dBm	0.1 V
1761593773	24 ug/m3	30 ug/m3	40 ug/m3	-36 dBm	0.14 V
1761593451	23 ug/m3	29 ug/m3	41 ug/m3	-42 dBm	0.12 V
1761593129	24 ug/m3	29 ug/m3	36 ug/m3	-42 dBm	0.12 V
1761592485	25 ug/m3	31 ug/m3	44 ug/m3	-41 dBm	0.14 V
1761592163	22 ug/m3	28 ug/m3	33 ug/m3	-36 dBm	0.14 V
1761591841	23 ug/m3	28 ug/m3	28 ug/m3	-39 dBm	0.1 V
1761591519	24 ug/m3	30 ug/m3	36 ug/m3	-43 dBm	0.12 V
1761591197	23 ug/m3	29 ug/m3	29 ug/m3	-40 dBm	0.14 V
1761590875	26 ug/m3	32 ug/m3	45 ug/m3	-43 dBm	0.14 V
1761590553	27 ug/m3	33 ug/m3	43 ug/m3	-37 dBm	0.1 V
1761590231	23 ug/m3	29 ug/m3	33 ug/m3	-43 dBm	0.14 V
1761589909	28 ug/m3	35 ug/m3	47 ug/m3	-43 dBm	0.12 V
1761589598	25 ug/m3	30 ug/m3	34 ug/m3	-43 dBm	0.12 V
1761589265	26 ug/m3	32 ug/m3	45 ug/m3	-42 dBm	0.14 V
1761588928	27 ug/m3	33 ug/m3	43 ug/m3	-37 dBm	0.14 V
1761588696	28 ug/m3	35 ug/m3	48 ug/m3	-45 dBm	0.12 V
1761588374	27 ug/m3	33 ug/m3	37 ug/m3	-39 dBm	0.14 V
1761588052	25 ug/m3	31 ug/m3	40 ug/m3	-39 dBm	0.12 V
1761587730	25 ug/m3	31 ug/m3	34 ug/m3	-41 dBm	0.14 V
1761587408	28 ug/m3	35 ug/m3	45 ug/m3	-44 dBm	0.12 V
1761587086	27 ug/m3	34 ug/m3	48 ug/m3	-45 dBm	0.14 V
1761586764	24 ug/m3	30 ug/m3	41 ug/m3	-44 dBm	0.12 V
1761586442	27 ug/m3	34 ug/m3	46 ug/m3	-42 dBm	0.14 V

*Used Equation Coefficients:

PM1.0: 0, 1, 0

PM2.5: 0, 1, 0

PM10: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)