NO2C-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object NO2C-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RFIn*	RFiGate*	Temp*
1772692655	465 Pkts	436 Pkts	11 C
1772689055	368 Pkts	348 Pkts	11 C
1772685455	256 Pkts	246 Pkts	12 C
1772681855	154 Pkts	143 Pkts	12 C
1772678255	240 Pkts	225 Pkts	11 C
1772674655	205 Pkts	192 Pkts	12 C
1772671055	196 Pkts	178 Pkts	12 C
1772667455	168 Pkts	163 Pkts	12 C
1772663871	349 Pkts	335 Pkts	12 C
1772660255	393 Pkts	367 Pkts	12 C
1772656655	304 Pkts	287 Pkts	12 C
1772653055	367 Pkts	351 Pkts	12 C
1772649455	316 Pkts	297 Pkts	11 C
1772645855	355 Pkts	342 Pkts	12 C
1772642255	347 Pkts	319 Pkts	12 C
1772638655	281 Pkts	270 Pkts	12 C
1772635055	329 Pkts	308 Pkts	11 C
1772631455	145 Pkts	140 Pkts	12 C
1772627855	303 Pkts	287 Pkts	11 C
1772624255	335 Pkts	316 Pkts	11 C
1772620655	344 Pkts	316 Pkts	10 C
1772617055	259 Pkts	237 Pkts	11 C
1772613455	311 Pkts	284 Pkts	10 C
1772609855	264 Pkts	242 Pkts	11 C
1772606255	209 Pkts	192 Pkts	11 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)