VK2RAY Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK2RAY. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	CPU Tmp*	Env Tmp*	BattV*	BattI*	Pwr*
1788601920	38.5 degC	-0 degC	13.16 V	-2.4 A	-33 W
1788601860	38.5 degC	-0 degC	13.16 V	-2.4 A	-33 W
1788601800	39 degC	-0 degC	13.16 V	-2.4 A	-33 W
1788601740	38.5 degC	-0 degC	13.16 V	-2.4 A	-37 W
1788601680	39 degC	-0 degC	13.04 V	-7.2 A	-33 W
1788601620	38.5 degC	-0 degC	13.16 V	-2.4 A	-33 W
1788601560	39 degC	-0 degC	13.16 V	-2.4 A	-41 W
1788601500	38.5 degC	-0 degC	13.16 V	-2.4 A	-33 W
1788601440	38.5 degC	-0 degC	13.16 V	-2.4 A	-33 W
1788601408	38.5 degC	-0 degC	13.16 V	-2.4 A	-33 W
1788601320	38.5 degC	-0 degC	13.16 V	-2.4 A	-33 W
1788601260	38.5 degC	-0 degC	13.16 V	-2.4 A	-33 W
1788601200	38.5 degC	-0 degC	13.16 V	-2.4 A	-33 W
1788601140	38.5 degC	-0 degC	13.16 V	-2.4 A	-33 W
1788601080	39 degC	-0 degC	13.16 V	-2.4 A	-33 W
1788601020	38.5 degC	-0 degC	13.16 V	-2.4 A	-33 W
1788600960	38.5 degC	-0 degC	13.16 V	-2.4 A	-33 W
1788600900	38.5 degC	-0 degC	13.16 V	-2.4 A	-33 W
1788600840	38.5 degC	-0 degC	13.16 V	-2.4 A	-33 W
1788600780	39 degC	-0 degC	13.16 V	-2.4 A	-33 W
1788600720	38.5 degC	-0 degC	13.16 V	-2.4 A	-37 W
1788600660	39 degC	-0 degC	13.04 V	-6.4 A	-33 W
1788600600	38.5 degC	-0 degC	13.16 V	-2.4 A	-33 W
1788600540	38.5 degC	-0 degC	13.16 V	-2.4 A	-33 W
1788600480	38.5 degC	-0 degC	13.16 V	-2.4 A	-33 W

*Used Equation Coefficients:

CPU Tmp: 0, 0.5, 0

Env Tmp: 0, 0.3333, -10

BattV: 0, 0.04, 9

BattI: 0, 0.4, -50

Pwr: 0, 4, -509

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)