NK7N-9 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object NK7N-9. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Battery*	Temp*
1776446147	14.15 Volts	82.67 Deg.F
1776445741	14.06 Volts	84.43 Deg.F
1776445239	12.39 Volts	87.07 Deg.F
1776444830	14.06 Volts	89.71 Deg.F
1776444810	14.12 Volts	89.71 Deg.F
1776444770	14.15 Volts	89.71 Deg.F
1776444705	14.21 Volts	88.83 Deg.F
1776444688	14.15 Volts	88.83 Deg.F
1776443501	14.3 Volts	87.07 Deg.F
1776443387	14.21 Volts	86.19 Deg.F
1776443330	14.27 Volts	86.19 Deg.F
1776443240	14.21 Volts	85.31 Deg.F
1776442950	14.27 Volts	84.43 Deg.F
1776442770	14.27 Volts	83.55 Deg.F
1776442680	14.15 Volts	83.55 Deg.F
1776442590	14.24 Volts	83.55 Deg.F
1776442410	14.15 Volts	82.67 Deg.F
1776442320	14.24 Volts	82.67 Deg.F
1776442141	14.24 Volts	81.79 Deg.F
1776442050	14.21 Volts	81.79 Deg.F
1776441960	14.24 Volts	81.79 Deg.F
1776441950	14.15 Volts	80.92 Deg.F
1776441943	14.24 Volts	80.92 Deg.F
1776441921	14.18 Volts	80.92 Deg.F
1776441901	14.18 Volts	80.04 Deg.F

*Used Equation Coefficients:

Battery: 0, 0.0293, 0

Temp: 0, 0.879, -459.67

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)