DL8GAK-7 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DL8GAK-7. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Celsius*	Rel_Hum*	Atm_Press*
1787557522	21.5 C	46.27 %	952.88 hPa
1787557396	21.1 C	46.21 %	1021.25 hPa
1787557252	21.1 C	46.36 %	952.75 hPa
1787470917	20.3 C	51.31 %	1027 hPa
1787470791	20.4 C	50.56 %	955.38 hPa
1787394800	21.7 C	51.89 %	1021.38 hPa
1787393846	22.1 C	50.92 %	1021.75 hPa
1787392942	22.3 C	50.41 %	1022 hPa
1787392804	22.2 C	50.28 %	1021.25 hPa
1787392171	22 C	51.81 %	1019.88 hPa
1787391266	21.5 C	52.65 %	1023.25 hPa
1787390464	21.5 C	52.33 %	951.38 hPa
1787310119	22.5 C	60.12 %	1014.5 hPa
1787309978	22.6 C	60.14 %	942.38 hPa
1787238934	28.8 C	37.91 %	1019 hPa
1787238889	28.8 C	37.81 %	1019.38 hPa
1787238804	28.7 C	37.38 %	1023.75 hPa
1787238780	28.7 C	37.25 %	1020.13 hPa
1787238731	28.6 C	36.78 %	1019.25 hPa
1787214330	31.3 C	39.94 %	1020.75 hPa
1787214254	31.2 C	39.96 %	1020.38 hPa
1787214189	31.2 C	39.87 %	1019.13 hPa
1787213913	30.9 C	40.65 %	1018.5 hPa
1787213889	30.9 C	40.62 %	1021.75 hPa
1787213853	30.9 C	40.62 %	1020.25 hPa

*Used Equation Coefficients:

Celsius: 0, 0.1, -50

Rel_Hum: 0, 0.01, 0

Atm_Press: 0, 0.125, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)