IQ3MF-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IQ3MF-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	Dg10m*	DgR*	Eff*
1772922116	194 Pkt	1040 Pkt	1 Pkt	1.33 Pcnt	78 Pcnt
1772921816	199 Pkt	1030 Pkt	1 Pkt	1.33 Pcnt	78 Pcnt
1772921516	164 Pkt	990 Pkt	1 Pkt	1.33 Pcnt	78 Pcnt
1772921216	137 Pkt	990 Pkt	1 Pkt	1.33 Pcnt	78 Pcnt
1772920916	142 Pkt	1000 Pkt	1 Pkt	1.33 Pcnt	78 Pcnt
1772920616	156 Pkt	1030 Pkt	1 Pkt	1.33 Pcnt	78 Pcnt
1772920316	156 Pkt	1050 Pkt	1 Pkt	1.33 Pcnt	78 Pcnt
1772920016	154 Pkt	1060 Pkt	1 Pkt	1.33 Pcnt	78 Pcnt
1772919716	149 Pkt	1070 Pkt	1 Pkt	1.33 Pcnt	78 Pcnt
1772919416	126 Pkt	1100 Pkt	1 Pkt	1.33 Pcnt	78 Pcnt
1772919116	145 Pkt	1150 Pkt	1 Pkt	1.33 Pcnt	78 Pcnt
1772918816	161 Pkt	1180 Pkt	1 Pkt	1.33 Pcnt	78 Pcnt
1772918516	144 Pkt	1190 Pkt	1 Pkt	1.33 Pcnt	78 Pcnt
1772918216	158 Pkt	1220 Pkt	1 Pkt	1.33 Pcnt	78 Pcnt
1772917916	164 Pkt	1250 Pkt	1 Pkt	1.33 Pcnt	78 Pcnt
1772917616	177 Pkt	1290 Pkt	1 Pkt	1.33 Pcnt	78 Pcnt
1772917316	192 Pkt	1310 Pkt	1 Pkt	1.33 Pcnt	78 Pcnt
1772917016	193 Pkt	1300 Pkt	1 Pkt	1.33 Pcnt	78 Pcnt
1772916716	175 Pkt	1300 Pkt	1 Pkt	1.33 Pcnt	78 Pcnt
1772916416	200 Pkt	1310 Pkt	1 Pkt	1.33 Pcnt	78 Pcnt
1772916116	225 Pkt	1340 Pkt	1 Pkt	1.33 Pcnt	78 Pcnt
1772915816	199 Pkt	1350 Pkt	1 Pkt	1.33 Pcnt	78 Pcnt
1772915516	188 Pkt	1360 Pkt	1 Pkt	1.33 Pcnt	78 Pcnt
1772915216	193 Pkt	1350 Pkt	1 Pkt	1.33 Pcnt	78 Pcnt
1772914916	207 Pkt	1350 Pkt	1 Pkt	1.33 Pcnt	78 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

DgR: 0, 0.001, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)