ARSTRA Telemetry

This is the latest recevied telemetry packets stored in our database for station/object ARSTRA. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1780608118	14.27 Volt	340 Pkt	200 Pkt	72 Pcnt
1780607818	17.98 Volt	330 Pkt	200 Pkt	71 Pcnt
1780607518	14.27 Volt	330 Pkt	210 Pkt	71 Pcnt
1780607217	18.05 Volt	340 Pkt	220 Pkt	71 Pcnt
1780606917	14.05 Volt	340 Pkt	220 Pkt	72 Pcnt
1780606618	18.05 Volt	330 Pkt	210 Pkt	72 Pcnt
1780606316	17.69 Volt	330 Pkt	220 Pkt	72 Pcnt
1780606016	18.13 Volt	330 Pkt	230 Pkt	72 Pcnt
1780605716	17.47 Volt	340 Pkt	230 Pkt	74 Pcnt
1780605416	18.05 Volt	340 Pkt	230 Pkt	74 Pcnt
1780605115	18.27 Volt	370 Pkt	250 Pkt	76 Pcnt
1780604815	18.35 Volt	380 Pkt	270 Pkt	77 Pcnt
1780604515	18.05 Volt	390 Pkt	260 Pkt	77 Pcnt
1780604214	18.2 Volt	400 Pkt	270 Pkt	78 Pcnt
1780603915	18.2 Volt	390 Pkt	260 Pkt	77 Pcnt
1780603614	18.2 Volt	390 Pkt	250 Pkt	78 Pcnt
1780603013	18.27 Volt	420 Pkt	260 Pkt	79 Pcnt
1780602412	18.13 Volt	420 Pkt	250 Pkt	79 Pcnt
1780601812	18.2 Volt	420 Pkt	250 Pkt	78 Pcnt
1780601512	17.76 Volt	400 Pkt	230 Pkt	75 Pcnt
1780601212	18.27 Volt	390 Pkt	220 Pkt	75 Pcnt
1780600912	18.27 Volt	380 Pkt	220 Pkt	74 Pcnt
1780600613	18.42 Volt	370 Pkt	210 Pkt	74 Pcnt
1780600310	13.54 Volt	380 Pkt	210 Pkt	75 Pcnt
1780600010	13.47 Volt	360 Pkt	200 Pkt	74 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.0728, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)