ED1ZAE-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object ED1ZAE-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx1h*	Dg1h*	Eff*	Volt*	Temp*
1776676933	330 Pkt	190 Pkt	78 Pcnt	12.88 Volt	18.5 C
1776676334	340 Pkt	190 Pkt	78 Pcnt	12.88 Volt	18.5 C
1776675733	340 Pkt	190 Pkt	78 Pcnt	12.88 Volt	18.5 C
1776674534	330 Pkt	190 Pkt	78 Pcnt	12.88 Volt	18 C
1776674533	330 Pkt	190 Pkt	78 Pcnt	12.88 Volt	18 C
1776673333	340 Pkt	190 Pkt	78 Pcnt	12.88 Volt	17.5 C
1776672734	340 Pkt	190 Pkt	78 Pcnt	12.8 Volt	17 C
1776672133	330 Pkt	190 Pkt	78 Pcnt	12.8 Volt	17 C
1776670934	290 Pkt	160 Pkt	78 Pcnt	12.88 Volt	17 C
1776670933	290 Pkt	160 Pkt	78 Pcnt	12.88 Volt	17 C
1776669733	300 Pkt	170 Pkt	78 Pcnt	12.88 Volt	16.5 C
1776669134	300 Pkt	160 Pkt	78 Pcnt	12.88 Volt	16 C
1776668533	300 Pkt	160 Pkt	78 Pcnt	12.88 Volt	16 C
1776667334	310 Pkt	160 Pkt	78 Pcnt	12.88 Volt	15.5 C
1776667333	310 Pkt	160 Pkt	78 Pcnt	12.88 Volt	15.5 C
1776666135	310 Pkt	170 Pkt	78 Pcnt	12.88 Volt	15.5 C
1776665534	320 Pkt	170 Pkt	78 Pcnt	12.88 Volt	15.5 C
1776664933	320 Pkt	160 Pkt	78 Pcnt	12.88 Volt	15.5 C
1776663734	340 Pkt	180 Pkt	78 Pcnt	12.88 Volt	15 C
1776663733	340 Pkt	180 Pkt	78 Pcnt	12.88 Volt	15 C
1776662533	340 Pkt	180 Pkt	78 Pcnt	12.88 Volt	15 C
1776661934	360 Pkt	180 Pkt	78 Pcnt	12.88 Volt	14.5 C
1776661333	350 Pkt	190 Pkt	78 Pcnt	12.88 Volt	15 C
1776660134	350 Pkt	180 Pkt	78 Pcnt	12.88 Volt	15.5 C
1776660134	350 Pkt	180 Pkt	78 Pcnt	12.88 Volt	15.5 C

*Used Equation Coefficients:

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff: 0, 1, 0

Volt: 0, 0.074, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)