YO7MGH-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YO7MGH-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	T ext.*	Value2*	Value3*	Value4*	Value5*
1788573098	18.9 °C	0	0	0	0
1788572498	18.9 °C	0	0	0	0
1788571897	19.2 °C	0	0	0	0
1788571298	19.7 °C	0	0	0	0
1788570698	20.7 °C	0	0	0	0
1788570097	20.3 °C	0	0	0	0
1788569497	19.8 °C	0	0	0	0
1788568897	19.3 °C	0	0	0	0
1788568296	20.1 °C	0	0	0	0
1788567697	20.8 °C	0	0	0	0
1788567097	21.4 °C	0	0	0	0
1788566496	21.8 °C	0	0	0	0
1788565897	22.5 °C	0	0	0	0
1788565297	23.3 °C	0	0	0	0
1788564696	22.6 °C	0	0	0	0
1788564097	22.1 °C	0	0	0	0
1788563497	22.2 °C	0	0	0	0
1788562897	22 °C	0	0	0	0
1788562298	21.6 °C	0	0	0	0
1788561698	21.9 °C	0	0	0	0
1788561097	21.8 °C	0	0	0	0
1788560498	22.3 °C	0	0	0	0
1788559898	22.7 °C	0	0	0	0
1788559297	23.5 °C	0	0	0	0
1788558698	23.9 °C	0	0	0	0

*Used Equation Coefficients:

T ext.: 0, 1, -100

Value2: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)