HS9UAC-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS9UAC-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	PM1.0*	PM2.5*	PM10*	RSSI*	Voltage*
1787557934	31 ug/m3	35 ug/m3	50 ug/m3	-44 dBm	5.87 V
1787556083	34 ug/m3	38 ug/m3	55 ug/m3	-42 dBm	6.01 V
1787555159	32 ug/m3	35 ug/m3	55 ug/m3	-43 dBm	6.03 V
1787554234	39 ug/m3	48 ug/m3	65 ug/m3	-42 dBm	6.03 V
1787553309	45 ug/m3	49 ug/m3	77 ug/m3	-42 dBm	6.05 V
1787552385	42 ug/m3	55 ug/m3	75 ug/m3	-42 dBm	6.03 V
1787551460	40 ug/m3	49 ug/m3	79 ug/m3	-41 dBm	5.87 V
1787550535	50 ug/m3	53 ug/m3	76 ug/m3	-42 dBm	6.01 V
1787549611	42 ug/m3	51 ug/m3	72 ug/m3	-41 dBm	6.11 V
1787548686	48 ug/m3	55 ug/m3	81 ug/m3	-41 dBm	5.87 V
1787547762	46 ug/m3	57 ug/m3	82 ug/m3	-42 dBm	6.01 V
1787546837	43 ug/m3	53 ug/m3	78 ug/m3	-41 dBm	6.03 V
1787545913	48 ug/m3	57 ug/m3	82 ug/m3	-42 dBm	6.05 V
1787544988	46 ug/m3	54 ug/m3	83 ug/m3	-41 dBm	5.87 V
1787544064	48 ug/m3	50 ug/m3	77 ug/m3	-43 dBm	5.84 V
1787543139	51 ug/m3	60 ug/m3	100 ug/m3	-42 dBm	6.03 V
1787542214	48 ug/m3	54 ug/m3	76 ug/m3	-42 dBm	6.03 V
1787541290	53 ug/m3	53 ug/m3	76 ug/m3	-42 dBm	6.01 V
1787540365	48 ug/m3	58 ug/m3	88 ug/m3	-42 dBm	5.91 V
1787539441	40 ug/m3	52 ug/m3	84 ug/m3	-42 dBm	6.03 V
1787538516	40 ug/m3	51 ug/m3	75 ug/m3	-42 dBm	6.03 V
1787537591	40 ug/m3	46 ug/m3	65 ug/m3	-42 dBm	6.01 V
1787536667	33 ug/m3	41 ug/m3	62 ug/m3	-42 dBm	6.03 V
1787535742	30 ug/m3	39 ug/m3	57 ug/m3	-42 dBm	5.87 V
1787534818	41 ug/m3	44 ug/m3	57 ug/m3	-41 dBm	6.03 V

*Used Equation Coefficients:

PM1.0: 0, 1, 0

PM2.5: 0, 1, 0

PM10: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)