2E0XLS-9 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 2E0XLS-9. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Battery*	Temp*
1757529074	12.77 Volts	24.65 Deg.C
1757528894	12.77 Volts	24.65 Deg.C
1757528713	12.77 Volts	24.65 Deg.C
1757528533	12.77 Volts	24.65 Deg.C
1757528352	12.77 Volts	25.14 Deg.C
1757527995	12.77 Volts	25.14 Deg.C
1757527814	12.77 Volts	25.14 Deg.C
1757527631	12.8 Volts	25.14 Deg.C
1757527450	12.77 Volts	25.14 Deg.C
1757527271	12.77 Volts	25.63 Deg.C
1757527089	12.77 Volts	25.63 Deg.C
1757526913	12.77 Volts	26.12 Deg.C
1757526729	12.77 Volts	25.63 Deg.C
1757526549	12.77 Volts	26.12 Deg.C
1757526368	12.77 Volts	26.12 Deg.C
1757526187	12.77 Volts	26.12 Deg.C
1757526007	12.77 Volts	26.12 Deg.C
1757525826	12.77 Volts	26.12 Deg.C
1757525646	12.77 Volts	26.61 Deg.C
1757525465	12.77 Volts	26.61 Deg.C
1757525286	12.77 Volts	26.61 Deg.C
1757525105	12.77 Volts	26.61 Deg.C
1757524925	12.77 Volts	27.1 Deg.C
1757524744	12.69 Volts	27.1 Deg.C
1757524564	12.54 Volts	27.59 Deg.C

*Used Equation Coefficients:

Battery: 0, 0.0293, 0

Temp: 0, 0.489, -273.15

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)