SR7EOP Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR7EOP. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1780981615	12.15 Volt	130 Pkt	40 Pkt	66 Pcnt
1780981315	12.15 Volt	130 Pkt	40 Pkt	67 Pcnt
1780981015	12.15 Volt	120 Pkt	40 Pkt	65 Pcnt
1780980715	12.15 Volt	120 Pkt	40 Pkt	66 Pcnt
1780980415	12.15 Volt	110 Pkt	40 Pkt	67 Pcnt
1780980116	12.15 Volt	120 Pkt	40 Pkt	70 Pcnt
1780980115	12.15 Volt	120 Pkt	40 Pkt	70 Pcnt
1780979815	12.15 Volt	110 Pkt	40 Pkt	70 Pcnt
1780979515	12.15 Volt	110 Pkt	40 Pkt	71 Pcnt
1780979215	12.15 Volt	110 Pkt	40 Pkt	71 Pcnt
1780978915	12.15 Volt	110 Pkt	40 Pkt	72 Pcnt
1780978615	12.15 Volt	110 Pkt	40 Pkt	74 Pcnt
1780978316	12.15 Volt	110 Pkt	50 Pkt	75 Pcnt
1780978315	12.15 Volt	110 Pkt	50 Pkt	75 Pcnt
1780978015	12.15 Volt	120 Pkt	50 Pkt	76 Pcnt
1780977715	12.15 Volt	120 Pkt	50 Pkt	77 Pcnt
1780977415	12.15 Volt	110 Pkt	50 Pkt	81 Pcnt
1780977115	12.15 Volt	120 Pkt	50 Pkt	82 Pcnt
1780976815	12.15 Volt	110 Pkt	50 Pkt	81 Pcnt
1780976515	12.15 Volt	120 Pkt	50 Pkt	82 Pcnt
1780976215	12.15 Volt	110 Pkt	50 Pkt	82 Pcnt
1780975918	12.15 Volt	110 Pkt	50 Pkt	80 Pcnt
1780975915	12.15 Volt	110 Pkt	50 Pkt	80 Pcnt
1780975615	12.15 Volt	110 Pkt	50 Pkt	80 Pcnt
1780975315	12.15 Volt	110 Pkt	50 Pkt	82 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)