TA2IK-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA2IK-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1785313870	106 Pkt	36 Pkt	1 Pkt	-66 dBm	0.08 V
1785312947	154 Pkt	36 Pkt	1 Pkt	-65 dBm	0.08 V
1785312018	134 Pkt	29 Pkt	6 Pkt	-65 dBm	0.08 V
1785311093	124 Pkt	25 Pkt	8 Pkt	-65 dBm	0.08 V
1785310167	110 Pkt	20 Pkt	8 Pkt	-65 dBm	0.08 V
1785309244	116 Pkt	19 Pkt	11 Pkt	-65 dBm	0.08 V
1785308349	112 Pkt	19 Pkt	14 Pkt	-66 dBm	0.08 V
1785307398	118 Pkt	19 Pkt	16 Pkt	-64 dBm	0.08 V
1785306472	12 Pkt	0 Pkt	1 Pkt	-65 dBm	0.08 V
1785305544	116 Pkt	36 Pkt	4 Pkt	-64 dBm	0.08 V
1785304621	102 Pkt	35 Pkt	3 Pkt	-66 dBm	0.06 V
1785303702	106 Pkt	42 Pkt	4 Pkt	-66 dBm	0.08 V
1785302774	113 Pkt	37 Pkt	5 Pkt	-62 dBm	0.06 V
1785301850	113 Pkt	31 Pkt	4 Pkt	-64 dBm	0.08 V
1785300927	109 Pkt	30 Pkt	2 Pkt	-64 dBm	0.08 V
1785300003	104 Pkt	19 Pkt	4 Pkt	-66 dBm	0.08 V
1785299081	149 Pkt	17 Pkt	11 Pkt	-66 dBm	0.08 V
1785298153	115 Pkt	14 Pkt	6 Pkt	-66 dBm	0.08 V
1785297228	100 Pkt	16 Pkt	7 Pkt	-65 dBm	0.08 V
1785296305	14 Pkt	1 Pkt	3 Pkt	-67 dBm	0.08 V
1785295945	112 Pkt	35 Pkt	5 Pkt	-67 dBm	0.08 V
1785295023	101 Pkt	41 Pkt	5 Pkt	-67 dBm	0.08 V
1785294101	81 Pkt	30 Pkt	9 Pkt	-66 dBm	0.08 V
1785293181	96 Pkt	25 Pkt	5 Pkt	-67 dBm	0.08 V
1785292261	109 Pkt	16 Pkt	7 Pkt	-67 dBm	0.08 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)