HP1CDW-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HP1CDW-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	EffTo*
1776980528	14.03 Volt	80 Pkt	20 Pkt	42 Pcnt	52 Pcnt
1776979928	14.03 Volt	80 Pkt	20 Pkt	41 Pcnt	52 Pcnt
1776979328	14.03 Volt	80 Pkt	20 Pkt	38 Pcnt	52 Pcnt
1776978728	14.03 Volt	80 Pkt	20 Pkt	37 Pcnt	52 Pcnt
1776978128	14.03 Volt	90 Pkt	30 Pkt	38 Pcnt	52 Pcnt
1776977528	14.03 Volt	100 Pkt	40 Pkt	40 Pcnt	52 Pcnt
1776976928	14.03 Volt	110 Pkt	50 Pkt	42 Pcnt	52 Pcnt
1776976328	14.03 Volt	120 Pkt	50 Pkt	45 Pcnt	52 Pcnt
1776975728	13.35 Volt	120 Pkt	50 Pkt	48 Pcnt	52 Pcnt
1776975128	14.03 Volt	120 Pkt	50 Pkt	49 Pcnt	52 Pcnt
1776974528	14.03 Volt	110 Pkt	50 Pkt	48 Pcnt	52 Pcnt
1776973928	14.03 Volt	100 Pkt	40 Pkt	50 Pcnt	52 Pcnt
1776973328	14.03 Volt	80 Pkt	30 Pkt	55 Pcnt	52 Pcnt
1776972728	14.03 Volt	80 Pkt	30 Pkt	50 Pcnt	52 Pcnt
1776972128	14.03 Volt	80 Pkt	20 Pkt	50 Pcnt	52 Pcnt
1776971528	14.03 Volt	70 Pkt	20 Pkt	49 Pcnt	52 Pcnt
1776970928	14.03 Volt	70 Pkt	30 Pkt	47 Pcnt	52 Pcnt
1776970328	14.03 Volt	80 Pkt	30 Pkt	48 Pcnt	52 Pcnt
1776969728	14.03 Volt	70 Pkt	20 Pkt	47 Pcnt	52 Pcnt
1776969128	14.03 Volt	80 Pkt	30 Pkt	51 Pcnt	52 Pcnt
1776968528	14.03 Volt	80 Pkt	30 Pkt	50 Pcnt	52 Pcnt
1776967928	14.03 Volt	90 Pkt	30 Pkt	52 Pcnt	52 Pcnt
1776967328	14.03 Volt	80 Pkt	30 Pkt	49 Pcnt	52 Pcnt
1776966728	14.03 Volt	80 Pkt	30 Pkt	49 Pcnt	52 Pcnt
1776966128	14.03 Volt	70 Pkt	20 Pkt	49 Pcnt	52 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

EffTo: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)