WY7W Telemetry

This is the latest recevied telemetry packets stored in our database for station/object WY7W. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1784762748	14.03 Volt	680 Pkt	70 Pkt	78 Pcnt
1784762448	14.1 Volt	660 Pkt	80 Pkt	77 Pcnt
1784762148	14.03 Volt	680 Pkt	80 Pkt	78 Pcnt
1784761848	13.95 Volt	680 Pkt	70 Pkt	78 Pcnt
1784761548	14.1 Volt	670 Pkt	70 Pkt	79 Pcnt
1784761248	14.03 Volt	660 Pkt	70 Pkt	79 Pcnt
1784760948	14.03 Volt	650 Pkt	60 Pkt	78 Pcnt
1784760648	14.1 Volt	630 Pkt	60 Pkt	78 Pcnt
1784760348	14.03 Volt	600 Pkt	60 Pkt	78 Pcnt
1784760049	14.1 Volt	590 Pkt	60 Pkt	79 Pcnt
1784759749	14.1 Volt	580 Pkt	60 Pkt	80 Pcnt
1784759449	14.1 Volt	560 Pkt	60 Pkt	81 Pcnt
1784759149	14.1 Volt	560 Pkt	60 Pkt	81 Pcnt
1784758849	14.1 Volt	580 Pkt	60 Pkt	84 Pcnt
1784758549	14.03 Volt	540 Pkt	70 Pkt	84 Pcnt
1784758249	14.03 Volt	540 Pkt	80 Pkt	83 Pcnt
1784757949	14.03 Volt	530 Pkt	80 Pkt	83 Pcnt
1784757649	14.1 Volt	530 Pkt	80 Pkt	85 Pcnt
1784757349	14.1 Volt	520 Pkt	80 Pkt	84 Pcnt
1784757049	14.1 Volt	510 Pkt	80 Pkt	85 Pcnt
1784757049	14.1 Volt	510 Pkt	80 Pkt	85 Pcnt
1784756749	14.1 Volt	520 Pkt	80 Pkt	85 Pcnt
1784756449	14.1 Volt	520 Pkt	80 Pkt	86 Pcnt
1784756149	14.1 Volt	520 Pkt	70 Pkt	86 Pcnt
1784755849	14.03 Volt	520 Pkt	70 Pkt	86 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)