E22ULT-5 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object E22ULT-5. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	RxDrop*	RSSI*	Voltage*
1787549698	14 Pkt	0 Pkt	31 dBm	15.11 V
1787547870	10 Pkt	0 Pkt	31 dBm	15.09 V
1787546043	26 Pkt	0 Pkt	31 dBm	15.09 V
1787544208	30 Pkt	0 Pkt	31 dBm	15.11 V
1787542368	12 Pkt	0 Pkt	31 dBm	15.09 V
1787540538	15 Pkt	0 Pkt	31 dBm	15.07 V
1787538709	17 Pkt	0 Pkt	31 dBm	15.09 V
1787536961	20 Pkt	0 Pkt	31 dBm	15.09 V
1787535052	28 Pkt	0 Pkt	31 dBm	15.07 V
1787533218	47 Pkt	0 Pkt	31 dBm	15.09 V
1787531380	48 Pkt	0 Pkt	31 dBm	15.09 V
1787529541	81 Pkt	0 Pkt	31 dBm	15.09 V
1787527695	28 Pkt	1 Pkt	31 dBm	15.09 V
1787525858	27 Pkt	0 Pkt	31 dBm	15.09 V
1787524027	27 Pkt	0 Pkt	31 dBm	15.09 V
1787522309	25 Pkt	0 Pkt	31 dBm	15.09 V
1787520359	15 Pkt	0 Pkt	31 dBm	15.09 V
1787518528	19 Pkt	0 Pkt	31 dBm	15.09 V
1787516696	17 Pkt	0 Pkt	31 dBm	15.09 V
1787514866	24 Pkt	0 Pkt	31 dBm	15.09 V
1787513032	28 Pkt	0 Pkt	31 dBm	15.09 V
1787511195	19 Pkt	0 Pkt	31 dBm	15.09 V
1787509364	21 Pkt	0 Pkt	31 dBm	15.09 V
1787507530	17 Pkt	0 Pkt	31 dBm	15.09 V
1787505699	13 Pkt	0 Pkt	31 dBm	15.09 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)