DK9HI-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DK9HI-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	Hum*	QNH*	Temp.out*
1776671529	1010.5 hPa	19.5 C deg	41.2 %	1017.8 hPa	0 C deg
1776671521	1010.5 hPa	19.5 C deg	41.2 %	1017.8 hPa	0 C deg
1776669712	1010.3 hPa	19.7 C deg	41.4 %	1017.6 hPa	0 C deg
1776669701	1010.3 hPa	19.7 C deg	41.4 %	1017.6 hPa	0 C deg
1776666081	1009.8 hPa	19.6 C deg	41.2 %	1017.1 hPa	0 C deg
1776666075	1009.8 hPa	19.6 C deg	41.2 %	1017.1 hPa	0 C deg
1776664260	1009.7 hPa	19.6 C deg	41.3 %	1017 hPa	0 C deg
1776664253	1009.7 hPa	19.6 C deg	41.3 %	1017 hPa	0 C deg
1776662443	1009.5 hPa	19.6 C deg	41.1 %	1016.8 hPa	0 C deg
1776660635	1009.2 hPa	19.5 C deg	40.4 %	1016.6 hPa	0 C deg
1776657014	1009.3 hPa	19.8 C deg	40.4 %	1016.6 hPa	0 C deg
1776656992	1009.3 hPa	19.8 C deg	40.4 %	1016.6 hPa	0 C deg
1776655180	1009.5 hPa	19.9 C deg	40.6 %	1016.8 hPa	0 C deg
1776653367	1009.7 hPa	19.9 C deg	40.5 %	1017 hPa	0 C deg
1776653361	1009.7 hPa	19.9 C deg	40.5 %	1017 hPa	0 C deg
1776644300	1010.4 hPa	20.1 C deg	40.4 %	1017.7 hPa	0 C deg
1776640664	1010.6 hPa	20.2 C deg	40.4 %	1017.9 hPa	0 C deg
1776640658	1010.6 hPa	20.2 C deg	40.4 %	1017.9 hPa	0 C deg
1776638863	1010.8 hPa	20.3 C deg	40.4 %	1018.1 hPa	0 C deg
1776638843	1010.8 hPa	20.3 C deg	40.4 %	1018.1 hPa	0 C deg
1776633398	1011.2 hPa	20.5 C deg	40.7 %	1018.5 hPa	0 C deg
1776629774	1011.2 hPa	20.6 C deg	40.9 %	1018.5 hPa	0 C deg
1776629774	1011.2 hPa	20.6 C deg	40.9 %	1018.5 hPa	0 C deg
1776627977	1011.2 hPa	20.7 C deg	41.1 %	1018.5 hPa	0 C deg
1776627960	1011.2 hPa	20.7 C deg	41.1 %	1018.5 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)